Aluminum Tube vs Plastic Tube | Primepac
Introduction
With its convenience, variety, and relatively low cost, the tube packaging method is increasingly becoming a mainstream packaging method in the cosmetic industry.
The main forms include aluminum tubes, Plastic tubes, and Aluminum barrier laminated tubes.
They have advantages and disadvantages in terms of material, process, and performance.
In this blog, we will list Plastic Tube and Aluminum Tube's characteristics for comparison, which helps you to have a clear understanding of the products.
The blog will include the following content:
Material of Plastic Tube
The Characteristics of Various Types of Tube
Comparison between 4 types of tube
Material Choice of Plastic Tube
The quality of the material is the key to ensuring the quality of the tube, it will directly affect the processing and use of the tube
Plastic tube materials are polyethylene PE (for tube body, tube head), polypropylene PP (tube cover), color masterbatch, barrier resin, printing ink, varnish, etc.
So, the selection of any material will directly affect the quality of the tube.
However, the choice of materials also depends on the health requirements, barrier (the conditions of oxygen and water vapor resistance, fragrance preservation, etc.), chemical resistance, and other factors.
- Material sanitation
First of all, the materials used should meet the relevant health standards, heavy metals, fluorescent agents, and other harmful substances should be controlled within the prescribed limits.
For example, the tubes exported to the United States have to meet the U.S. Food and Drug Administration (FDA) standard 21CFR117.1520 which has a limitation on the polyethylene(PE) and polypropylene(PP)
- Barrier properties of materials
If the contents are particularly sensitive to oxygen (such as some whitening cosmetics) or fragrance is very easy to volatilize (such as essential oils or acids, salts, and other corrosive chemicals) of the product. Under such circumstances, manufacturers would be better to select a five-layer co-extruded tube
Because five-layer co-extruded tube’s (polyethylene/binder resin / EVOH / binder resin/polyethylene) oxygen transmission rate is 0.2 ~ 1.2 units, while the ordinary polyethylene single-layer tube oxygen transmission rate is 150 ~ 300 units.
In addition, EVOH is an ethylene-vinyl alcohol copolymer, has an excellent barrier, and fragrance retention (thickness in 15 ~ 20 microns effect is a perfect choice)
Double-layer tube: the use of high-density HDPE and LDPE low-density PE material, in a certain proportion with the pumping method, to achieve a uniform mixing effect by high-speed rotation
In this way, the tube can achieve a balance of softness and hardness.
Compared to the single-layer tube, the tube body is thicker, with a better corrosion resistance barrier, and lower oxygen transmission rate, adopted by the majority of daily cosmetics manufacturers.
- The stiffness of the material
Cosmetic companies have different requirements for the stiffness of the tube, so how to get the desired stiffness?
The polyethylene commonly used in the tube is mainly low-density polyethylene, high-density polyethylene, and linear low-density polyethylene.
The stiffness of high-density polyethylene is better than that of low-density polyethylene, so the desired stiffness can be achieved by adjusting the ratio of high-density polyethylene/low-density polyethylene.
- Chemical resistance of the material
High-density polyethylene has better chemical resistance than low-density polyethylene.
- Weather resistance of the material.
To control the short-term or long-term performance of the tube, you need to consider: Appearance, pressure/drop resistance, sealing strength, environmental stress cracking resistance (ESCR value), fragrance, and active ingredient loss.
The Characteristics of Various Types of Tube
1、All-aluminum tube
Stamped from 4~5mm thick aluminum plate.
Packaging performance: good stability (physical, chemical, microbiological aspects), with a certain strength, heat, and cold resistance, lightweight, shading, easy to clean, easy to sterilize.
Advantages
- Rust-resistance
aluminum is the most commonly used metal, aluminum materials do not rust, and its oxides are non-toxic with good shading, excellent moisture and gas barrier, and good processing performance. It would not rebound. Without thermal conductivity, it can provide good ductility, airtightness, and full protection of drugs.
- Tightness
Excellent gas tightness of all-aluminum tube. Because the dense aluminum and the aluminum tube is made by single material punching and extrusion, there is no possibility of leakage of different materials.
all-aluminum tube scrap can be recycled and smelted again to use.
Disadvantages.
Production efficiency is low, the cost is high. It’s easy to break when we use it,
the strength is very poor, extrusion feel is also bad.
Corrosive contents like flooring containing cream will lead to the corrosion of All aluminum tubes.
Causing penetration holes and breakage, and aluminum ions will also enter the contents
2、PE tube
This kind of product is Extruded from a single layer of PE.
soft to the touch, easy to recycle, but with low water and oxygen barrier performance.
Advantages
- Convenient and durable
PE tube is easy to use, economical and convenient to pack, and easy to carry, even under high-intensity circumferential extrusion, it can still recover its original shape and maintain a good appearance.
- Eco-friendly
When it comes to environmental protection and energy saving, PE tubes are able to use less material, which is easy for recycling and degrades.
Disadvantages
Low production efficiency, the results of silkscreen printing on the surface of tubes are not long enough, which is easy to burst.
Aluminum barrier laminated tube(ABL Tube)
Made of PE inner film PE outer film and 10um aluminum foil.
Packaging performance: good isolation performance, not easy to break, fine printing, bright colors, clean and hygienic, easy to use, soft touch, good wrinkle resistance.
Advantages
Compared with an all-aluminum tube, an Aluminum barrier laminated tube has many advantages.
- Lightweight
20%-30% lighter than the same specification all-aluminum tube, the amount of aluminum used per unit of product is reduced by 80%, making the packaging considerably lightweight.
- Simple process
Simple process, suitable for high-speed, continuous production, less energy consumption, low cost, and high production efficiency.
- Safety
because plastic is the inner wall material, these kinds of tube have better corrosion resistance and health safety.
- Oxidation resistance
aluminum-plastic tube not only maintains the barrier and oxidation resistance of all-aluminum tube but also has the characteristics of the plastic tube such as anti-acid, anti-discoloration, anti-hardening, and anti-oil-water separation.
Disadvantages
Pool control of the PE layer can lead to the deterioration of products
And it’s not easy to separate and recycle after disposal.
Plastic Barrier Laminated Tube
PBL is a composite material that forms the body of laminate tubes. Laminated in plastic, it consists primarily of six PE layers and two bonding ones with an EVOH layer between them for strength; making up all parts necessary to create this unique product!
Advantages
The plastic barrier laminated tube is an excellent product for many different purposes.
- The barrier for vapor and oxygen
It has a great barrier property to water vapor and oxygen, making it perfect for keeping things fresh. It also has an excellent aroma barrier, meaning it will keep your products smelling great.
- Flexibility
The high flexibility of the material means that it won’t crack even during repeated deformation, making it extremely reliable.
- Wide Application
The tubes are made of polymer films which are just as reliable as tubes made of laminates based on aluminum. This makes them perfect for a wide range of applications.
Comparison Among 4 Types of Tube
Customization – printing effect
ABL / PBL can offer you more choices for printing
PBL can also have a metallic effect, which makes the packaging brighter
All aluminum tubes and PE tubes always use Silk Screen Printing, even using the same printing process as ABL and PBL, you can’t get the same appearance for the different materials and production processes.
So, if you have high demand in packaging surface printing, we recommend you choose ABL or PBL
Price
PE/ABL/PBL are similar to each other.
All aluminum tube is expensive than others.
Appearance
All aluminum and PE extruded tube bodies have no joint seam
PBL and ABL will have a joint seam
The minimum order quantity for reference
Custom PE/ABL/PBL tube 5000-10000
Pure aluminum tube 30,000
Production lead time
Custom PE/ABL/PBL tubes are shorter than All aluminum tubes
Application
all aluminum tubes: Mainly used in the pharmaceutical ointment, cream, and gel packaging.
PE tube: Mainly used in facial cleansers, hand cream
ABL tube: It is mainly used in the packaging of toothpaste, ointment, cosmetics, detergents, chemicals, pigments, etc., among which toothpaste packaging has the largest consumption.
PBL Tube: the perfect solution for all your cosmetic, personal care products, and pharmaceutical needs.
You can also find them in use by food producers to package their products.
Conclusion
Thank you for reading our blog post on the material of cosmetic plastic tubes.
We hope that this article has been informative and helpful.
If you have any questions or would like to learn more about the different types of tubes we offer, please don’t hesitate to contact us today.
We would be happy to discuss your specific needs and provide you with a quote for our products. Thanks again for your interest in our company!
UK Cosmetic Tube | Everything You Want to Know
Introduction
The tube is a cosmetic packaging widely used in the world, the product is non-toxic and hygienic
with bright and beautiful surface color and affordable price.
It is also widely used in various industries like cosmetics, medicine, food, detergent, and other daily necessities packaging.
Tube packaging is economical and easy to carry. That’s why cosmetic companies will use it to hold lotions and gums.
In recent years, with the rapid development of the modern packaging industry and the continuous optimization of plastic tube packaging, tube packaging has become increasingly popular.
In this blog， we will share all the information you may need about Tube packaging. At last, we will provide a list of trustworthy tube packaging suppliers for reference.
The blog will include the following content:
The application of tube packaging
Classification of Plastic Tube
The development trend of the composite tube sheet
The production process of the cosmetic tube
Cosmetic tube suppliers
The application of tube packaging
The plastic laminated tube has become one of the main packaging varieties for cosmetics, medicine, and food because of its proper price and good hygiene.
According to relevant reports, the strong growth of skin care products and bath products has driven the growth rate of tube packaging.
The tube has advantages that other packaging cannot provide, therefore, since its inception, it plays an important role in the packaging industry.
Now it has become an indispensable form of packaging for cosmetics and pharmaceuticals.
Plastic composite tube in the cosmetics industry is mainly used for cleaning cream, facial wash (milk liquid), shower gel, shampoo, shampoo cream, conditioner, hair dye, hair removal cream, toothpaste, and other products
At present, cosmetic companies are the considerable customer of tube packaging, accounting for about 60% to 70%
Tube in the pharmaceutical industry is mainly used in the packaging of creams and pastes for topical drugs. Drugs in the tube packaging accounted for 15% to 20% of the proportion.
Classification of Plastic Tube
The single-layer tube includes metal tubes and plastic extruded tubes; multi-layer tubes include aluminum composite tubes, plastic composite tubes, and plastic co-extruded tubes.
According to the processing classification, the tube can be divided into seamless tubes and seamed tubes.
The seamless tube includes three kinds of processes: cold press forming, roll forming, and extrusion forming; Seamed tube includes more processes, like high-frequency welding, ultrasonic welding, heat welding, and other forming methods.
Among them, extrusion molding can be processed in multi-layer or single-layer plastic tubes.
1. Aluminum barrier laminated tube（ABL Tube）
An aluminum barrier tube, also known as an ABL tube, is a type of packaging that uses an aluminum barrier layer to prevent oxygen and moisture from entering the product.
Made of aluminum foil and plastic film through a co-extrusion compounding process,ABL tubes are often used for products that are sensitive to oxidation or moisture, such as cosmetics and pharmaceuticals.
ABL tube’s typical structure is PE/PE+EAA/AL/PE+EAA/PE.
An aluminum barrier laminated tube is mainly used for packaging cosmetics with high requirements of hygiene and barrier, whose barrier layer is generally aluminum foil, and its barrier depends on the pinhole of aluminum foil. degree.
With the continuous improvement of technology, the thickness of the aluminum foil barrier layer in the ABL tube has been reduced from the traditional 40μm to 12μm, or even 9μm, which greatly saves resources.
ABL tube in the use of the process has the following advantages.
- excellence barrier performance
Aluminum foil has a light barrier, oxygen barrier, and water barrier properties, on the one hand, it can prevent the intrusion of external substances into the packaging, prevent oxidation and deterioration of cosmetics, also prevent cosmetic moisture or fragrance and other ingredients through the hose diffusion to the outside world, so as to ensure the quality of cosmetics.
- Low cost.
To achieve the same barrier performance, the ABL tube can achieve the same barrier performance with less material when compared to the all-plastic laminated tube and plastic co-extruded tube.
- Lightweight
One of the benefits of using aluminum is that it’s much lighter than other metals. This makes ABL tubes easy to transport and helps to reduce shipping costs.
- Durable
Aluminum is also known for being a very strong and durable metal. This means that ABL tubes can withstand a lot of wear and tear, making them ideal for products that will be shipped or stored for long periods of time.
- Customizable
ABL tubes can be customized to meet your specific needs. For example, they can be printed with your company’s logo or branding.
3. All-plastic laminate tube（PBL）
The all-plastic laminate tube is made of all plastic components. It can be divided into all-plastic non-barrier laminated tubes and all-plastic barrier laminated tubes.
The all-plastic non-barrier laminated tube is generally used for low-grade fast-consuming cosmetics packaging.
PBL laminated tube, due to the existence of side seams, is usually used in low-grade cosmetics packaging, a barrier layer can be a multi-layer composite material containing EVOH, PVDC, oxide coated PET, etc.
The typical structure of the PBL tube is PE/PE/EVOH/PE/PE.
The advantages of the PBL tube are as follows.
Compared with the ABL tube, the PBL tube uses an economical, easy-to-recycle all-plastic sheet, which can reduce the pollution of the environment
recycled all-plastic laminated tubes after reprocessing can be produced relatively low-grade products.
- Rich color
According to the characteristics of cosmetics and different consumer demands, the all-plastic laminated tubes can be made into different colors, such as colorless transparency, color transparency, color opaque, etc., to bring consumers a strong visual enjoyment.
Especially the transparent PBL tube, the color of the contents can be clearly seen, giving a strong visual impact, and greatly promoting the consumer’s desire to buy.
- Good resilience
Compared to aluminum-plastic laminated tubes, the PBL tube has better resilience to ensure that after squeezing, the tube can quickly return to its original form, maintaining a beautiful, regular appearance. This is crucial for cosmetic packaging.
Plastic co-extrusion tube
Plastic co-extrusion tube uses co-extrusion technology to co-extrude types of raw materials together in a single process.
Plastic co-extruded tube is divided into single-layer extruded tube and multi-layer co-extruded tube.
The former is mainly used for the packaging of fast-consuming cosmetics (such as hand creams, etc.) with high requirements for appearance and low requirements for actual use performance, while the latter is mainly used for the packaging of high-end cosmetics.
The main advantages of plastic co-extruded hose are as follows.
- better appearance
Since there is no side seal, the appearance is better than that of a laminated tub, which is necessary for high-grade cosmetic tube packaging.
- Rich choice of shape
According to the different extrusion, various shapes of the extruded tubes can be produced, such as oval, square, etc., to meet the needs of different consumers.
Analysis of the disadvantages of various plastic tubes
The above-mentioned three kinds of plastic tubes for cosmetic packaging have their own disadvantages.
(1) aluminum-plastic laminated tubes due to the use of aluminum foil, there are many drawbacks, such as invisible contents, poor environmental protection, poor resilience, compound strength lower than the full plastic laminated tubes, and easy delamination, etc.
(2) full plastic laminated tube’s barrier mainly depends on the type of barrier layer material, thickness, etc.,
Take all plastic laminated tube with EVOH as barrier layer material as an example
to achieve the same barrier and stiffness, its cost is about 20% to 30% higher than the aluminum ABL tubes.
In the future for a considerable period of time, this will become the main factor limiting the full plastic laminated tube to replace the aluminum-plastic laminated tube
(3) Plastic co-extrusion hoses are generally made first and then printed. For the printing process, the efficiency is low, the process is complex and difficult.
The development trend of the composite tube sheet
Aluminum foil has become thinner than ever
A composite tube sheet is usually composed of white polyethylene, acid copolymer, aluminum foil, transparent polyethylene, etc.
The traditional sheet is very thick, in which the aluminum foil is generally 40μ or 30μ. With the continuous improvement of technology, aluminum foil is getting thinner and thinner, and the proportion of its content in the sheet is getting smaller and smaller, from 29.44% in 1980 to the current 12.21%.
Thinner aluminum foils are now only 12μ, which brings the barrier layer closer to the contents.
Sheet transparency
More and more colored creams and gel-based ointments are gaining popularity with consumers.
When these products are packed in transparent laminated tubes, their attractive colors and good texture make people love them, and the clear tube packaging undoubtedly serves as the icing on the cake.
But the use of a transparent hose, the contents of the tube are vulnerable to ultraviolet radiation and degradation.
At present, companies have developed “UV-blocking” product formulations, that can effectively protect the filled product from UV damage.
Environmental friendliness is emphasized
When the thickness of the aluminum foil barrier layer in the hose is reduced from the traditional 40μ to 12μ, it can save a lot of resources.
Environmental friendliness is not only the disposal of packaging waste but also should include the pollution of the environment and its consumption of resources in the production process.
The use of EVOH (ethylene vinyl alcohol copolymer) and other high barrier materials enables manufacturers to completely replace the aluminum foil, so the composite tube can be fully recycled and conducive to biodegradation.
Whether it is cosmetics, pharmaceuticals, or food, the first thing to consider in packaging is hygiene performance, followed by barrier performance, print adaptability, and chemical resistance. Of course, the economy and ease of use must also be considered.
Basic, streamlined, simple – these words were used in the past to describe cosmetic packaging, especially tubes, these words are outdated now. In a flash, the trend has shifted in another direction.
“You are seeing the industry itself move away from the basic style of packaging,” said the industry’s tube packaging experts.
This shift is certainly from the simple white packaging to more colorful tubes.
And some stores such as Wal-Mart, have a big influence on this trend, as their shelves also feature a multitude of colored tubes; experts stressed that this is the need for visual effect.
Today’s consumers care about the packaging of their products, and many prefer to buy things that are uniquely packaged. Indeed, to stand out among the hundreds of products in the supermarket, and immediately attract the attention of customers, without some effort on the packaging is not possible.
Those who look new, easy to use, safe, and look like high-technology packaging will inevitably be more eye-catching. And the stores are deeply interested in this trend, and the shelves also feature a large number of colorful hoses.
Many large cosmetic companies are already using the tube after a subtle design. But the market is becoming more demanding for tube packaging, they require tube packaging with more beautiful patterns, softer touch, and the ability to place the picture on the composite tube.
Recently, the trend of the metallic appearance of tube packaging is still very hot. Interest in pearl and rainbow color effects is also continuing, these effects are achieved by adding color to the tube material.
Low cost
As the cosmetic companies cut their cost on the packaging, the tube manufacturers continue to depress the production cost of composite tube
the use of thinner aluminum foil and a more compact interlayer structure.
Aluminum composite tube sheet in the use of aluminum foil, from the initial 40μ down to the now prevailing 20μ to 30μ, thinner type can be 12μ.
Of course, the reduction of aluminum foil thickness is by no means a simple subtraction, to achieve the reduction of aluminum foil thickness at the same time ensures its good product performance, the innovation of the process and the improvement of the equipment, and even other materials, in essence, each of its thinning is benefited from the improvement.
Reduce the loss in the production process.
For the production of aluminum-plastic composite tubes, try to use a larger width of the gravure printing process and double or multi-head co-extrusion technology, improve the process, improve the production speed, in order to increase production efficiency and reduce losses.
The production process of the cosmetic tube
Extrusion
The first phase of manufacturing a plastic cosmetic tube is extrusion.
Plastic Extruders are used to manufacture high-volume, single-use tubes that can be customized with various colors and shapes for branding purposes (such as lipstick or eye shadow).
Raw material such as resins Pellets Granules Powder Flakes enters into the barrel alongside any color concentrates needed at the time.
These ingredients melt together when heated by specific machinery arrangements inside each device so they flow smoothly without clogging up Too much heat will cause distortion while too little results in globbing: This happens because different materials respond differently
So, temperature control is so important that will influence the following process。
Cutting
In the second stage, cutting takes place. Plastic cosmetic tubes are available in all shapes and sizes.
After passing through high temperatures (such as those that occur during heating), they’re fed into a water-cooled sleeve where color dies cut specific lengths for each product type – this process is known as “cutting.”
Heading
The heading process is a key step in the production of cosmetic tubes. This process involves using a compression method to mold the tube head from a donut of molten resin material.
This method is superior to traditional heading methods because it results in a stronger and more durable head for the cosmetic tube. The heading process also allows for greater flexibility in design, making it possible to create unique and eye-catching cosmetic tube heads.
Compression heading is the process of forming a tube head from a donut of molten resin material.
This method is superior to traditional heading methods because it results in a stronger and more durable head for the cosmetic tube.
The heading process also allows for greater flexibility in design, making it possible to create unique and eye-catching cosmetic tube heads.
The compression heading process begins by heating the donut of resin material to a molten state.
Once molten, the donut is placed in a mold and compressed into the desired shape. The resulting head is then cooled and removed from the mold.
Compression heading offers several advantages over traditional heading methods.
Firstly, it results in a stronger and more durable head for the cosmetic tube. Secondly, it allows for greater flexibility in design, making it possible to create unique and eye-catching cosmetic tube heads.
Finally, compression heading is a faster and more efficient heating method, making it ideal for mass production
Printing
After the hearing process is complete, the cosmetic tube can then be printed with your desired design or decoration.
This printing can be done using a variety of methods, including screen printing, offset printing, and gravure printing.
Each printing method has its own advantages and disadvantages, so it is important to choose the right one for your specific needs.
Screen printing of cosmetic tubes after the process of heading is a printing technology that prints cosmetics directly on the surface of plastic products.
It has the advantages of high printing speed, low cost, and strong adaptability. This printing method is suitable for mass production of small batch printing.
The printing speed can reach 150m/min. After printing, it can be used for hot stamping, die cutting, and other post-processing methods.
The main equipment for printing cosmetic tubes after the process of heading are an anilox roll, doctor blade, chamber doctor blade, ink pump, printing cylinder, and die-cutting plate.
The anilox roll transfers the ink to the die-cutting plate through the doctor’s blade.
The chamber doctor blade is mainly used to scrape off the excess ink on the anilox roll.
An ink pump is used to provide printing ink. The printing cylinder rotates and transfers the printing pattern to the surface of the product. The die-cutting plate is used for die cutting after printing.
Cosmetic tube suppliers
There are many cosmetic tube suppliers in the UK that can provide you with the packaging you need for your products.
Here is a list of some of the most popular suppliers in the country:
Primepac
At PrimePac, we bring together design experts and brand innovators to create fresh ideas, customized packages, and fully efficient processes.
We design creative packaging solutions that cater to a diverse global audience with the in-house knowledge and network of experienced professionals to meet the demands of every type of client.
From our dedicated sales team and warehouse staff in the UK to the experts at our production facilities in China, all of our employees are guided by four core values at the heart of our business: integrity, innovation, passion, and engagement.
Weltrade Packaging Solutions
Weltrade Packaging Solutions strives to be the best in every way. From their mission statement, which says they are committed and honest with customers’ needs; it’s clear that WPS wants nothing more than for you to get what your heart desires while also supporting sustainable practices within our community at large!
Auber
Auber is a leading manufacturer of cosmetic tubes in the industry since 2004. We have been providing our customers with high-quality, durable products that can be found globally across many industries including cosmetics and pharmaceuticals as well as painting tools for artisans around the world who need them locally on their expressive work surfaces.
With over ten years of experience under its belt, AUBE offers manufactured from start to finish through ISO 9001 certification so you know your purchase will always include top-notch quality control right down
Mpack
The business is family-owned, with 15 years of experience. They provide high-quality standards!
We are a reliable supplier specializing in the production and packing for companies operating within the cosmetics, para pharmaceuticals food & household chemicals industries.
Providing a strong reputation as well as caring about our environment by offering eco-friendly options like sugarcane tubes made from ecological polyethylene (SUGARCANE) which contains recycled material PCR
APG packaging
In the world of beauty, there is no such thing as overnight success.
It takes years and often many attempts at first before one can get their product into stores or on people’s shelves- but that hasn’t stopped some entrepreneurial spirits from trying!
One company that knows this all too well is APG Packaging; founded by Helga Arminak with more than 25 years of experience in cosmetics packaging – they’ve achieved unparalleled speed across factories both domestically (in America) as well as abroad where most production takes place today due largely because it offers lower costs than competitors out there
Conclusion
there you have it – a quick overview of the tube packaging industry and how it is evolving. Cosmetic tube suppliers are always looking for new ways to improve their products, so if you’re interested in getting into this market, don’t hesitate to contact us.
Plastic Containers for Cosmetic Products
Introduction
In our modern society, it seems like there is a never-ending demand for new and innovative cosmetic products.
From anti-aging creams to concealers, people are always on the lookout for the latest and greatest in beauty technology.
As a business owner, it’s important to stay ahead of the curve and offer your customers the best possible products. One way to do this is by using plastic containers for your cosmetics.
Plastic containers are a great choice for many reasons.
They are lightweight and easy to transport, which makes them ideal for use in busy salons or spas.
They are also durable and shatterproof, so they can withstand the rigors of everyday use.
And because they come in a variety of shapes and sizes,
If you have an interest in plastic packaging, do not miss this blog.
We will share the information about them
This blog will include the following content:
The trend of plastic containers for cosmetic products in the UK
Different types of plastic containers for cosmetic packaging
The trend of plastic containers for cosmetic products in the UK
Various sizes of plastic containers
The specification of plastic containers for cosmetic products has become increasingly diversified in recent years.
The reason for this is that there is a growing demand for containers that can meet the specific needs of different products and industries.
Another reason why a company might choose a diversified specification of plastic containers is to meet the requirements of a particular customer or client.
In some cases, a customer or client may have specific requirements for the type of container that is used.
By using a diversified specification of plastic containers, the company can ensure that the customer or client is satisfied with the product.
The diversity of plastic materials
The major materials of cosmetics and detergent packaging are high-density polyethylene HDPE.
To meet the packaging requirements of different products, new plastic material has been introduced in production.
Since transparent containers can let consumers clearly see the contents, consumers demand more and more transparent containers and transparent polypropylene
CPP is the main material that can meet this requirement, PP transparent bottle is a hot spot in recent years of plastic packaging.
Compared with other transparent plastic resins, CPP is a new product with high quality and low price
Transparent PET plastic material is another one that has been widely used in cosmetic packaging.
PET bottles have the following characteristics.
- A wide range of capacity
High-strength, highly transparent plastic bottles produced by the stretch blow molding process can provide a capacity range from less than 10 ml to 2 liters.
- Good transparency and gloss
good plasticity, impact resistance and dimensional stability, stable chemical properties, and good gas barrier.
More customer-oriented
Consumers’ shopping decisions are different due to differences in age, gender, occupation, culture, economic condition, and so on.
Therefore, packaging designer nowadays will focus more accurately on their targeted customers through market research.
They can have a better understanding of the development trend of plastic bottle packaging and consumer demand.
Eco-friendly plastic material
The eco-friendly trend of cosmetic packaging is becoming more and more popular.
Many companies are now using eco-friendly plastic materials to make their products.
Eco-friendly cosmetic packaging has many benefits that make it a great choice for both consumers and businesses.
For consumers, eco-friendly packaging is often more sustainable and environmentally friendly than traditional packaging options.
This can help reduce your carbon footprint and make a positive impact on the environment. Eco-friendly cosmetic packaging is also often made from recycled materials, which helps to reduce waste and conserve resources.
For businesses, eco-friendly cosmetic packaging can be a great way to show customers that you are committed to sustainability.
This can help build brand loyalty and attract new customers. Eco-friendly cosmetic packaging is also often more cost-effective than traditional packaging options, making it a smart choice for businesses.
Different types of plastic containers for cosmetic packaging
In the cosmetics industry, the packaging containers for creams, lotions, liquids, and other contents made of plastic materials such as acrylic, PET, PCTG, PETG, ABS, PP, PE, etc. are collectively referred to as plastic bottles.
According to the contents inside the container, there are lotion, perfume bottles, cream bottles, fragrance bottles, toner bottles, washing bottles, etc.
Injection bottles: Cream bottles are commonly used in PP, PETG, acrylic, and ABS materials. Cream bottles, caps, stoppers, gaskets, pump heads, and dust caps are mainly injection molded.
For example, due to its poor chemical resistance, an acrylic bottle cannot be filled directly with ointment.
It needs to be lined with an internal barrier.
The filler is not easy to fill to prevent the ointment from getting between the liner and the acrylic bottle.
Packaging requirements are relatively high because it looks particularly obvious after scratching. With strong permeability, it has a particularly thick upper wall.
Blow-molded bottles: molded in two steps, injecting the billet and blow molding the finished product.
Material mainly is PET. They are characterized by a concave and convex bottom of the bottle.
It is brighter in the light. Essence or lotion bottles, toner bottles, washing bottles, and other bottles are usually made by blow molding.
- 2. Surface treatment
In order to effectively display the contents, the bottles are often infused with solid colors, transparent natural colors, and a translucent feel.
Acrylic bottle walls use multi-purpose spray colors that refract light for good effect, and the surfaces of packaging materials such as caps and pump heads are often painted, vacuum plated, anodized aluminum, brushed gold, silver, secondary oxidation, and other processes to reflect the individuality of the product.
Plastic jars
Most of the cosmetics that are generally contained in jars are creams, clays, and other less liquid or non-fluid substances, such as creams, hair masks, masks, etc.
The reason why plastic jars are used instead of plastic bottles is that they are so liquid that it is difficult or impossible to take them by gravity alone, so a plastic jar with a larger caliber and capacity is a good choice.
Plastic jars have many advantages: lightweight, lower cost, reliable protection of products, better mechanical strength, and good shelf effect.
Most metal jars and glass jars have been replaced by it.
And because the price of aluminum and tinplate is now rising, the continued use of metal jars will inevitably make packaging costs increase
Glass jars are fragile. transportation of glass containers is far less convenient than plastic ones.
Besides, the plastic jars are light, which is conducive to long-distance transportation.
Combined with the label, we can make the packaging and product look more perfect.
At present, the plastic tube commonly used in the cosmetic industry mainly includes aluminum-plastic composite tube, all-plastic composite tubes, and multi-layer co-extruded tubes, which can meet the various needs of cosmetic packagings, such as hygiene, barrier properties, etc.
1. Aluminum-plastic composite tube
Aluminum-plastic composite tube is made of aluminum foil and plastic film through a co-extrusion compounding process, and then processed into a tube-like packaging container by a special tube-making machine,
Its typical structure is PE/PE+EAA/AL/PE+EAA/PE
Aluminum-plastic composite tube is mainly used for cosmetic packaging with high requirements of hygiene and barrier, and its barrier layer is generally aluminum foil, and its barrier depends on the pinhole of aluminum foil.
With the continuous improvement of technology, the thickness of the aluminum foil barrier layer in the aluminum composite tube has been reduced from the traditional 40μm to 12μm, or even 9μm, which greatly saves resources.
Aluminum-plastic composite tube has the following advantages
- 1. high barrier
aluminum foil has a light barrier, oxygen barrier, and water barrier properties, on the one hand, it can prevent the intrusion of external substances into the packaging, which can prevent oxidation and deterioration of cosmetics
On the other hand, it can also prevent moisture or fragrance and other components diffuse to the outside world so as to ensure the quality of cosmetics.
- 2. Low cost
To achieve the same barrier performance, the aluminum-plastic composite tubes used less material compared to the all-plastic composite tube and plastic co-extruded tube. This means higher economic performance
2. All-plastic composite tube
All-plastic composite tubes are made of all plastic components.
It can be divided into the all-plastic non-barrier composite tube and an all-plastic barrier composite tube.
All-plastic non-barrier composite tube is generally used for low-grade fast-consuming cosmetics packaging;
All-plastic barrier composite tube due to the existence of side seams is usually used for low-grade cosmetics packaging,
The typical structure of an all-plastic barrier composite hose is PE/PE/EVOH/PE/PE.
The advantages of an all-plastic composite tube are as follows.
- 1. Environmental friendliness.
Compared with an aluminum-plastic composite tube, all-plastic composite tubes use the all-plastic sheet which is economical and easy to recycle, which can reduce the pollution of the environment from packaging waste,
- 2. Color diversification.
According to the characteristics of cosmetic products and different consumer demands, the all-plastic composite tubes can be made in different colors to bring consumers a strong visual enjoyment.
Especially the transparent all-plastic composite tube, the color of the contents can be clearly seen, giving a strong visual impact, and greatly promoting the consumer’s desire.
- 3. Good resilience
Compared with an aluminum-plastic composite tube, the all-plastic composite tube has better resilience
The tube can quickly return to its original form after squeezing.
Always maintaining a beautiful, regular appearance. is crucial for cosmetic packaging.
Plastic Co-Extrusion Tube
Plastic co-extruded tube uses co-extrusion technology to co-extrude different properties and types of raw materials together and forms them in one go.
The plastic co-extrusion tube is divided into single-layer co-extrusion tubes and multi-layer co-extrusion tube
The former is mainly used for the packaging of fast-consuming cosmetics
with high requirements for appearance and low requirements for actual use performance,
while the latter is mainly used for the packaging of high-grade cosmetic hoses.
The main advantages of plastic co-extruded hose are as follows.
- 1. Better appearance
Because there is no side seal, the appearance is better than the composite tube, which is necessary for high-grade cosmetic packaging.
- 2. various shape
various shapes of the extruded tubes can be produced, such as oval, square, etc., so as to meet the needs of different consumers.
Vials
Vials are small, cylindrical containers used to package various items such as cosmetics, pharmaceuticals, and other chemical substances.
Vials typically have a screw-on cap or stopper that creates a seal, preventing the contents from spilling out.
Vials are made from different materials such as glass, plastic, and metal, and come in a variety of sizes.
Vials are often used in scientific and medical applications where it is important to protect the contents from contamination.
- 1、Type I, 33-expansion borosilicate glass
It is the most chemically inert glass available and is usually used in analytical laboratories to obtain high-quality experimental results. Its coefficient of expansion is about 33×10^(-7) ℃, mainly composed of silica and oxygen, but also contains trace amounts of boron and sodium.
- 2、Type I, 51-expansion glass
It is more alkaline than 33-expansion glass and can be used for a variety of laboratory applications. Its expansion coefficient is about 51x 10^(-7) ℃, mainly composed of silicon and oxygen, and also contains traces of boron.
- 3、Deactivated glass (DV)
For analytes with strong polarities, de-activated vials may be a good choice. Glass vials are treated with glass-phase reactive organosilanes to produce a hydrophobic glass surface. De-activated vials can be stored dry indefinitely.
- 4、Polypropylene plastic
Polypropylene (PP) is a non-reactive plastic that can be used where glass is not an appropriate choice. Polypropylene vials can still maintain a good seal when burned with fire, thus minimizing the possibility of exposure to potentially hazardous substances.
The maximum use temperature is 135 °C.
Conclusion
Plastic containers for cosmetic products are becoming more and more popular.
This is because they offer a number of benefits to both the manufacturer and the consumer.
For manufacturers, plastic containers can be molded into any shape, which gives them a lot of flexibility in terms of design.
They are also cheaper than glass or metal containers, making them an attractive option for companies on a budget.
For consumers, plastic containers are often seen as being more sanitary than other types of packaging.
They are also lighter and easier to transport, which makes them ideal for people who lead active lifestyles.
If you’re looking for high-quality plastic containers for your cosmetic products, contact Primepac today.
We can provide you with everything from small sample jars to large storage tanks
Plastic Bottle vs Glass Bottle for Cosmetic Packaging
Introduction
The main container for cosmetics are no more than these three categories “glass bottles, plastic bottles, and tubes“, they all play a different and important role in cosmetics packaging.
Among them: glass bottles account for less than 8%, and the other 90% of the market share is plastic bottles, tubes, etc.
However, there is a special phenomenon in the cosmetic industry, that is, “high-end cosmetic product prefers glass bottle packaging”
Why do high-end cosmetics prefer glass bottles? What are the reasons behind it?
And why the plastic bottle and tubes can account for a big part of the cosmetic packaging market？ what’s the advantage of plastic containers?
Just reading through this blog, you will get the answers.
This blog will include the following content:
Plastic bottles Vs Glass bottles for cosmetic packaging
Reasons for preferring glass bottle packaging
How to choose a cosmetic glass bottle manufacturer
Development of Plastic bottles for cosmetic
Plastic bottles or Glass bottles for cosmetic packaging
In fact, glass bottles or plastic bottles for cosmetics, these packaging materials are not absolutely good or bad.
different companies, different brands, and different products, according to their own brand and product positioning, cost, and profit target needs, choose to use different “appropriate” packaging materials.
let’s analyze the advantages and disadvantages of glass bottles, and plastic bottles, and the differences between the two, so that may better help you make a choice.
Plastic bottle advantages and disadvantages
Pros
- Plastic bottles are less dense than glass products, have light, adjustable transparency, are not easy to break, are convenient for storage and transportation, and are easy for consumers to carry and use.
- Plastic bottles have better corrosion resistance, acid and alkali resistance, impact resistance, and high mechanical strength and are easy to shape and lower production losses.
- Plastic products are easy to color, can be adjusted according to the needs of color, easier to achieve the packaging design needs.
Compared to glass bottles, the cost of plastic bottles will be relatively low.
Cons
- Plastic material is easy to produce chemical reactions with cosmetic content in the bottle, which can easily cause cosmetics to deteriorate.
- Plastic bottles are easy to carry static electricity, and the surface is easily contaminated.
- plastic packaging containers are not environmentally friendly, discarded bottles will cause environmental pollution.
- plastic containers look relatively cheap and are not suitable for a high-end product
Advantages and disadvantages of glass bottle
Advantages
- The glass bottle is stable non-toxic and not easy to produce a chemical reaction with skin care products. good barrier prevent the cosmetics from deteriorating
- The glass bottle has a higher transparency, the contents are clearly visible,
- Strong rigidity enables the glass bottle not easy to deform, in addition to the heavier weight, glass bottles provide the consumers with a better hand feeling
- glass bottle temperature tolerance is good, can be sterilized at high temperatures, it can also be stored at low temperatures;
A glass bottle can make more thorough and convenient disinfection than a plastic bottle - glass bottles can be recycled and reused, with no pollution to the environment.
Disadvantages
-
- The glass bottle is brittle, easy to break, and not easy to store and transport.
- The weight of glass bottles is large, and the transportation cost is high, especially for e-commerce express.
- Energy consumption in Glass bottle processing is large, which causes stronger pollution to the environment if a glass bottle can’t be recycled many times.
- Compared with plastic bottles, the printing performance of glass bottles is poor.
- Compared with plastic bottles, glass bottles have a high cost in mold creation high so they need a larger minimum order.
Reasons for preferring glass bottle packaging
Protect the product
To improve the basic function of protecting the contents inside the packaging, the pursuit of high functionality, multi-function, and quality assurance.
Especially now in the era of “efficacy skin care” Among high-end cosmetics, preference for glass bottle packaging will be common.
The above analysis already lets us knows that the glass bottle has the features like stability, good barrier, heat resistance, light resistance, and solvent resistance.
It is not easy to produce chemical reactions with skin care products,
So from the “safety, and stability”, glass bottles are the most reassuring material!
The use of glass bottles for cosmetic products is more conducive to the preservation of care products with antioxidants, anti-aging, and whitening effects, as these ingredients are highly active and easily affected by light.
In addition, glass bottles have a high barrier to gas, but also make glass bottles become the preferred packaging material for perfumes and other volatile, easily dissipated fragrance products.
Therefore, the perfume packaging in the market is basically a glass bottle material.
Reason2: Maximize the attraction of customers and the performance of the brand
General cosmetics are mostly liquid, milky liquid, or cream, such products do not have a distinctive appearance. It must be designed through a beautiful and unique glass bottle to express its own characteristics.
Most of the cosmetic brands in the market are now using translucent or fully transparent glass bottles to highlight the composition and color of the liquid.
From the perspective of the consumer, the first thing is to attract the consumer’s attention (catch the consumer’s eye), and then trigger the consumer’s desire to buy. Transparent and pure, noble and elegant, is the charm of the glass bottle.
Therefore, the design and adoption of fashionable, eye-catching, energetic, and interesting external glass bottles are one of the means for cosmetic manufacturers to beat their competitors down.
Therefore, the glass bottle as a product “coat” should not only have the function of holding and protecting the product but also must have the role of attracting customers and pushing them to make decisions.
Reason 3: Maximize the taste and value of cosmetics
In the market, various skin care ideas are emerging, and various glass bottles are competing with each other, making people dazzled.
Many products not only tell people how efficient their product is but also sell fashion and culture.
The fashion and culture of cosmetics are usually what we call taste.
How to reflect the taste of cosmetics, in addition to product advertising and product counter display and other aspects, the glass bottle is an important link, an important carrier.
A decent glass bottle can not only directly stimulate the senses of consumers, but also can reflect the taste of the product
In addition, the heaviness of the glass bottle can make consumers trust and improve the grade of cosmetics, which is impossible to do with plastic packaging.
Cosmetics are “selling dreams, selling fashion, selling hope”, the psychological value of cosmetics play a big role, such as the same bottle of 5g cream, the key to the skin, and some well-known brand like Guerlain, Aquamarine, Leporene, and other can sell them in the price high as thousands of dollars, while other little brands are generally only a few hundred tens of dollars or even lower.
Reason 4: Glass bottles can be recycled and reused, which minimizes the pollution of the environment
Because of the plastic restriction， packaging which is green, eco-friendly, and reusable has become the first choice of enterprises. Cosmetic packaging is no exception
Data show that the discarded plastic bottles from Coca-Cola, Pepsi, and Nestle have become the world’s top three largest plastic polluters.
Forced by the relevant laws and external public opinion pressure, they have implemented plastic bottle recycling, the implementation of renewable plastic bottles, and other measures.
but there is still a long distance from totally using biodegradable plastic.
Therefore, glass bottles can be recycled and reused without pollution to the environment, which should also be one of the important reasons why high-end cosmetics prefer glass bottle packaging.
Among them, the recycling of glass bottles attracts consumers to join environmental protection activities.
On the one hand, they are taking on their own responsibility to directly face the challenges of environmental protection and social responsibility;
on the other hand, they are actively communicating with consumers through these environmental protection activities, which greatly enhances the brand reputation of the company.
How to choose a cosmetic glass bottle manufacturer
As analyzed above, “maintaining and improving the basic function of protecting the contents, maximizing customer attraction and brand performance, maximizing the taste and value of cosmetics, recycling and reuse of glass bottles, and no pollution to the environment” are the “four main reasons” why high-end cosmetic brand prefer to choose glass bottles.
So, for the above “four” reasons, how to choose an “excellent” glass bottle manufacturer becomes the key for cosmetic brands.
When choosing a cosmetic glass bottle manufacturer, is a test for the brand – because it involves quality, quality, price, efficiency, market competitiveness, corporate profit, and many other aspects.
1、Design and development ability, innovative technology.
The appearance and style of a glass bottle, quality, reflect the design and development capabilities, and innovative technology of glass bottle manufacturers.
Therefore, this is the first element in the selection of enterprises.
Especially when you need to make a private mold, many factors should be considered, such as design, material selection, cycle time, cost, process details, effects, etc.
2, Glass bottle price and cost performance
Glass bottle price and cost performance are the powerful weapons that can make the brand stand out in homogenization
Generally speaking, “inexpensive” glass bottles can make the company a reasonable profit margin and higher competition.
3, Production scale and production efficiency
Glass bottle manufacturers’ production qualifications, the number of production lines, production equipment, production quality, and production efficiency, directly determine the product supply quantity and speed and indirectly determines the performance of corporate brand marketing.
Before making a decision, We have to go through the manufacturer from hand to toe.
In this way, it can effectively eliminate or reduce the number of products of substandard quality, delayed delivery or delivery shortage, and other conditions.
Development of Plastic bottles for cosmetic
With the development of technology, new plastic material has been applied in the production of plastic containers for cosmetics.
Polylactic acid, also known as poly(propylene glycol), belongs to the polyester family.
PLA is a polymer obtained by polymerizing lactic acid as the main raw material, which is well-sourced and renewable.
The production process of PLA is pollution-free, and the product is biodegradable and recyclable in nature, making it an ideal green polymer material.
Polylactic acid (PLA) is a new type of biodegradable material made from renewable plant resources (e.g. corn) by fermentation process to make lactic acid, which is then converted to PLA by polymer synthesis.
Advantages of polylactic acid (PLA).
Environmental Friendly
1. PLA has excellent biodegradability and can be completely degraded by microorganisms in the soil within one year after disposal, generating carbon dioxide and water, without pollution to the environment. “From nature, back to nature”! That’s what Pla can achieve.
World’s carbon dioxide emissions according to news reports in 2030 the global temperature will rise to 60 ℃, the treatment of ordinary plastic is still burning cremation, resulting in a large number of greenhouse gases into the air, while PLA is buried in the soil to degrade, the carbon dioxide generated directly into the soil organic matter or absorbed by plants, will not be discharged into the air, will not cause the greenhouse effect.
2、PLA is suitable for various processing methods
such as blow molding, injection molding, etc. It is easy to process and very widely used. It can be used to process various food containers, packaged food, fast food lunch boxes, non-woven fabrics, and industrial and civil clothes from industrial to civil.
In turn, it can be processed into agricultural fabrics, health care fabrics, wipes, sanitary products, outdoor UV protection fabrics, tent fabrics, floor mats, etc.
The market prospect is very promising. It can be seen that its mechanical properties and physical properties are good.
3. Wide application
The basic physical properties of polylactic acid (PLA) are similar to those of petrochemical synthetic plastics, which means that they can be used in a wide range of applications.
PLA also has good gloss and transparency, comparable to films made from polystyrene, those other biodegradable products cannot provide.
4. Good compatibility and degradability
PLA is also used in a wide range of pharmaceutical applications, such as disposable infusion sets, no-disassembly surgical sutures, and low-molecular PLA as a slow-release packaging agent for drugs.
5. Safety
polylactic acid (PLA) film has good permeability, oxygen permeability, and permeability to dioxide carbon, it also has the property of isolating odor.
Viruses and molds are easily attached to the surface of biodegradable plastics, so there are safety and health concerns, however, PLA is the only biodegradable plastic with excellent anti-bacterial and anti-mold properties.
Conclusion
So there you have it!
The pros and cons of glass and plastic cosmetic bottles. Hopefully, this article has helped you make a more informed decision about which type of bottle will be best for your product.
If you’re still not sure, or if you need help finding a quality glass bottle manufacturer, don’t hesitate to get in touch with us.
We would be happy to assist you in choosing the perfect packaging for your cosmetics line. Thanks for reading!
An Useful Guide to Box for Cosmetic Packaging
Introduction
It is no secret that cosmetic packaging is important to the success of a product.
After all, it is one of the most important factors that will ultimately determine how well the product sells.
This is why many cosmetic companies invest heavily in their packaging, making sure that it is both eye-catching and able to properly showcase the product.
Of course, there is more to cosmetic packaging than just aesthetics.
The packaging must also be functional, ensuring that the product is protected from damage and remains fresh for as long as possible.
Box for cosmetic packaging is the first thing that you should take care about because it can attract customers from all the competitors on the shelf at the first glance. Besides, a high-quality box for cosmetic packaging can protect your products inside well.
In other words, cosmetic packaging must strike the perfect balance between form and function in order to be successful.
So, if you are planning to launch a new cosmetic product, make sure to give its packaging the attention it deserves. Otherwise, you may find that your product does not reach its full potential in the market.
This blog will include the following content:
1. Cosmetic packaging is very important to the success of a product
2. Different types of cosmetic packaging
3. box packaging design
The importance of cosmetic packaging
1. Attract buyers’ eyes
A good cosmetic packaging design can better attract consumers and thus increase the sales of the brand.
We can see in many shopping malls that the cosmetic packaging of any brand is very beautiful and stylish, even if it is the same brand and different series of cosmetics will have a unique design.
One of the roles of cosmetics is to allow users to change their appearance and thus improve their self-confidence, and a well-designed package can make your product more trustworthy.
Once people have consumed all the products, the packaging can be used as a small artifact to keep at home. The packaging will be a lasting advertisement.
2、Reflect the brand quality
The packaging design of cosmetic products can reflect the level of the cosmetic brand.
The packaging design shows that the manufacturer is very attentive to any aspect of cosmetics, even the packaging has taken a lot of effort. The quality of the product inside is certainly guaranteed.
3. Act as a good advertisement
A good cosmetic packaging design should be able to attract the attention of consumers and make them interested in the product, as cosmetics directly affect their appearance.
Therefore, the packaging design of cosmetics should never be too cheap and should not be made of very cheap materials.
Nowadays, consumers are paying more and more attention to the packaging of cosmetics, and a successful cosmetic packaging design is very attractive to the majority of female consumers.
4. Brand perception and product differentiation
If you want your brand to be different from other brands, choose a unique and innovative design for the packaging.
Wholesale cosmetic packaging with its own color scheme and special designs can prove useful in the marketplace.
These factors can make your brand stand out from the rest of the products on the shelf.
Customers will find it attractive when they can easily find the desired product.
Therefore, in order to win the hearts and minds of your customers, you must carefully design the packaging of your cosmetics.
5. Provide the necessary information about the packaging
Cosmetics are applied to the skin, which is why there are different types of cosmetics for different types of skin. It is important to find the right cosmetics for your skin type.
Custom cosmetic boxes solve your problem; these boxes help you find the products you need. Customers will be happy with your brand if the information is clearly printed on your product packaging.
Different types of materials can be used for cosmetic packaging
Cosmetic box packaging materials are divided into the main container and auxiliary materials. The main container usually has plastic bottles, glass bottles, tubes, vacuum bottles, etc. Auxiliary materials are usually: cosmetic packaging box, inner tray,
Plastic bottles
1. Plastic bottles are generally made of PP, PE, ABS, ABS, acrylic, PET, etc.
2. PET material is environmentally friendly, lightweight, unbreakable, and chemically resistant. Transparent. Products made of this material can be made into pearlescent, colorful, magnetic white.
Widely used in the installation of jelly water. Bottle mouth is generally standard 16 #, 18 #, 22 #, and 24 # caliber, and can be used with the pump head.
3. Acrylic material is mostly used for injection molding bottles, chemical resistance is poor, generally can not be directly filled with products, and need to be equipped with a liner compartment.
It should not be completely filled to prevent the cream from entering the middle of the dinner and bottle to avoid cracking.
The requirements for transportation are very high.
4. AS, ABS.
AS has better transparency and toughness than ABS.
5. Mold development cost: blow mold $200-600, injection mold $1000-3000 ranging
Stainless steel material molds will be more expensive than alloy material molds, but durable.
How many molds do you need and how many times do the molds come out at a time depends on the production volume,
6. The initial order quantity is usually 3000-10000 pieces, and the color can be customized.
Most people will choose the original color and magnetic white, or add a pearl powder effect, although the bottle and the cap will be the same color, the color of the final product will be different depending on the material used for the bottle and the cap.
Glass bottle
1, Glass bottles for cosmetics are mainly divided into skin care products (creams, lotions), perfumes, essential oils, and nail polish, most of them are in a small capacity, which is less than 200ml.
2, glass bottles are divided into wide-mouth bottles, narrow-mouth bottles, and solid creams are generally used in wide-mouth bottles, it is appropriate to match the electrochemical aluminum cap or plastic lid, the cap can be used for color spray oil and other effects;
An emulsion or aqueous creams are generally used in narrow-mouth bottles, it is appropriate to match with the pump head. We need to pay attention to preventing the spring and ball rust, now most of the pump heads will use glass beads,
3, glass bottles are more consistent in the selection of materials, have more shapes, processing technology is rich, and the cap is diversified,
common bottle shapes are cylindrical, oval, flat, prismatic, conical, etc.,
manufacturers often develop a series of bottle shapes.
4. In Glass bottles such as those made by hand-made mold, there will be a little deviation in the capacity. the product should be tested, and make the correct capacity label
5. Glass bottles of uneven thickness will easily lead to damage, or easy to be squeezed to break by the contents in cold conditions,
It should be filling at a reasonable capacity,
In transportation, Single separation should be applied to the glass bottle for protection.
6. Commonly used glass bottles are usually available in stock, such as refined oil bottles, and plain clear, or frosted bottles.
Glass bottle production cycle is long, as soon as 20 days, some delivery period is 45 days, the general order quantity is 5,000 to 10,000, the smaller the bottle type to do more, cycle and mom will be affected by peak season, off-season.
7. bottle cap process can be electrolyzed aluminum lettering, bronzing edge, etching lines, and dumb light color, to match the gasket and inner cover, it is best to use the pressure-sensitive piece to strengthen the sealing effect.
8. Refined oil bottles are usually used in brown or colored and colored frosted, which enables the bottle to avoid light.
The cover has a safety ring, which can be matched with an inner plug or dropper, perfume bottles are generally matched with a delicate spray pump head or plastic cover.
Tube
1, Tube can be divided into single, double, or five layers
Their pressure, permeability, and sense of touch are different
five layers of the tube include an outer layer, an inner layer, two adhesive layers, and another barrier layer.
Features: with excellent gas barrier performance, it can effectively prevent the infiltration of oxygen and odor gas. Besides, it can also prevent the fragrance of the content and the exudation of active ingredients.
2, the double-layer tube is more commonly used.
the middle and low-end products will use the single-layer tube.
the caliber of the hose is various from 13# – to 60#
for the beauty and harmony, 60ml below product commonly use the caliber under 35# product volume like100ml, 150ml usually use the caliber from 35# – 45# caliber, capacity more than 150ml will use the caliber of 45#
3, the shape of the tube includes round, oval, flat, and super flat.
As the latest kinds of tubes, flat tubes, exceed flat-tube are more complex than any other tubes in the production process, so the price is correspondingly more expensive.
4. tube cover also have various shapes, such as flat caps, round caps, high caps, lift caps, super flat caps, double caps, spherical caps, lipstick caps, and plastic caps
Cap can also be processed in a variety of processes, bronzing edge, silver edge, colored caps, transparent, oil spraying, electroplating, etc., tip caps and lipstick caps are usually equipped with inner plugs.
5, some products need to fill after sealing, sealing is divided into straight-line sealing, twill sealing, umbrella sealing, star sealing, and special-shaped sealing, During the sealing process, the manufacturers can print out the required date code
6, Tube production cycle is generally 15 days to 20 days (from the confirmation of the sample tube)
Order quantity per product from 5 thousand to 10 thousand, large manufacturers usually take 10 thousand as the minimum order quantity, few small manufacturers will accept 3 thousand per product if there are many varieties in one order.
Few customers will make a totally brand new mold by themselves,
Most of them are public models (a few featured LIDS are private models). There is a ±10% deviation between the contracted quantity and the actual supply quantity in this industry.
Box
A box for cosmetic packaging is a type of container that is specifically designed to hold and protect cosmetics.
Cosmetic boxes come in a variety of sizes, shapes, and materials, and can be custom-made to fit the needs of any business.
Cosmetic boxes are an important part of the cosmetic packaging process because they help to keep products safe from damage during shipping and storage.
They also provide a way to display products in a retail setting. Boxes for cosmetic packaging can be made from a variety of materials, including cardboard, plastic, metal, or wood.
Cardboard is the most common material used for cosmetic boxes because it is lightweight and easy to work with.
Cardboard boxes can be printed with colorful designs and logos and can be die-cut to any shape.
Plastic cosmetic boxes are also popular because they are durable and offer a clear window for product visibility. Metal and wood boxes are less common, but can provide a more luxurious look for high-end cosmetics.
When selecting a box for cosmetic packaging, it is important to consider the type of product that will be packaged inside.
Boxes for liquid cosmetics, such as foundations and perfumes, need to be leak-proof and have tight-fitting lids.
Boxes for powders, eyeshadows, and blushes should have compartments or trays to keep products from shifting during shipping.
And boxes for lipsticks and other small items need to have individual compartments or slots to keep products organized and easy to find.
Cosmetic boxes can be purchased from a variety of sources, including packaging suppliers, printing companies, and online retailers. They can also be custom-made to specific size and shape requirements.
When selecting a box for cosmetic packaging, it is important to compare prices and turnaround times from multiple vendors to ensure the best possible price and delivery time.
Cosmetic Box Design
Cosmetic product packaging, like any other commodity, is required to achieve the final sale by virtue of packaging and is a commodity that relies heavily on packaging.
This is not only because the characteristics of cosmetic ingredients dictate the need for reasonable packaging that protects the safety and stability of the product, but also because cosmetics themselves are a special commodity that carries people’s desire to beautify themselves.
This is not only because cosmetics in order to achieve successful design results, but we also need a systematic and structured design for cosmetic box packaging.
Brand positioning expression
Brand positioning means establishing one’s market position or consumers’ psychological position in response to the target market demand, in such doing, the brand can determine a distinctive proposition for the brand, which should have great appeal to the target consumers and can establish a unique market position.
In the process of establishing this position, there needs to be a carrier that speaks for the brand, and packaging design, as the image representative of the brand, can make consumers identify with the brand’s value concept and product quality through visual channels.
After the positioning of the brand is clear, packaging design can be targeted and can serve the brand more effectively as a meaningful design.
Packaging design itself is a brand and culture-oriented discipline, which requires designers to carry out packaging design, not just to pursue the momentary benefits brought my creativity and fashion, but to make packaging design transform into an important way to establish brand connotation and create a lasting brand value through an accurate grasp of brand positioning.
The rules of series packaging
Cosmetics variety is unprecedented, consumers have a wider and wider choice.
As a company, it is necessary to classify and design product packaging through the efficacy and composition of the product to facilitate consumers’ identification and purchase of cosmetics.
The main purpose of product packaging classification design is to make a regular design by changing the printing color elements of the box packaging. Usually, the following combinations can be used for the packaging design of a series of products.
- The same container shape, different color printing offset box packaging color. This design can be implemented for cosmetic products with similar efficacy but different usage times. For example, the same series of morning cream and night cream, at this time more than the use of two-color printing offset box packaging color difference to distinguish the concept of time.
- The same container shape and container color. The same design style of box packaging, but the plastic box printing on one or several design elements to change the implementation of such design solutions are usually used for a series of cosmetics with the same function but different ingredients.For example, cosmetics that belong to the same fruit series use the same design style of box packaging because they all use fruit formulas, but the fruit formulas are divided into the pomegranate, lemon, tomato, and other formulas, so the plastic box packaging can be printed with the corresponding fruit pattern to distinguish them.
- The complementary shape of the container. The implementation of such design solutions are mostly products with matching functions. For example the same series of shampoo and conditioner, in order to reflect the unity of the two and imply that consumers should use them as a set to increase sales, usually the box packaging of the two will be designed as a whole, together with combined into a new overall shape.
Pictures
In short, adopting a corresponding design approach based on the different ways of classifying a series of cosmetics to provide consumers with a more effective, intuitive, and convenient way to guide their consumption will benefit both companies and consumers.
It should be noted that most cosmetic products packaged in boxes usually have different functional requirements for the front and the back.
The front is usually a reflection of the product’s logo image and design sense, showing the product’s own personality and style to interest consumers at first glance, while the back is usually just a large amount of explanatory text in a simpler form, as long as it is consistent in style with the front design pattern.
Conclusion
So, what’s the verdict? Is cosmetic packaging important to your success as a business?
The answer is undoubted yes. It’s not just about the product itself – the packaging also needs to be aesthetically pleasing and eye-catching if you want consumers to take notice.
And with so many products on the market these days, it takes more than a good product to make it stand out.
Different types of cosmetic packaging can help set your brand apart from the competition, so don’t neglect this aspect of your business.
If you’re looking for some advice on box packaging design or any other type of cosmetic packaging, feel free to contact us for more information. We’d be happy to help!
Everything You Want to know about Eco-Friendly Bag Packaging
Introduction
England. The Environmental Protection (Plastic Straws, Cotton Buds and Stirrers) (England) Regulations 2020 came into force in England in July 2021. They restrict the supply (not manufacture) of single-use plastic straws, cotton buds and drink stirrers.
In recent years, the trend of eco-friendly packaging has become increasingly strong because of global warming.
A city like Seattle even ban the use of plastic straws and utensils in restaurants in June 2018.
There is no doubt that we will see similar laws targeting plastic packaging will sprout around the world.
Under such conditions, what packaging can we choose to replace the plastic packaging? We can not deny that plastic bags make a great convenience to your daily life. They are affordable and lightweight, which makes them proper in many circumstances.
Can we find alternatives to plastic packaging? The answer is yes.
In many areas, people already found the new packaging.
Through this blog, you will know the most popular kinds of Eco-Friendly Bag Packaging which serve as alternatives to plastic packaging.
Do not miss it!
The blog will include the following content
Plastic Pollution Around the World
Eco-friendly Bag packaging
PLA Bag
Non-woven Bag
Calico Bag
Plastic Pollution Around the World
The world produces about 300 million tons of plastic waste each year, of which more than 8 million tons enter the ocean, equivalent to dumping a garbage truck full of plastic into the ocean every minute.
In addition, the global annual use of plastic bags is about 1 trillion, and plastic bottles are about 200 billion.
Difficult to degrade plastic bags, and plastic bottles will exist in nature for hundreds of years.
Since 2000, the global consumption of plastic products has been equivalent to the sum of all years consumed before 2000, one-third of which ended up dumped in the natural environment.
In turn, plastic waste enters the human body through water sources.
A previous survey found that the global per capita intake of 1,796 plastic particles through drinking water, according to the weight of these plastic particles is about 5 grams, equivalent to the plastic used in a credit card, a year calculated about 250 grams, that is, 50 credit cards.
If this continues, sooner or later, the earth will not only be covered by plastic waste, but clean drinking water will also be less and less.
Therefore, many countries have taken action, some completely ban plastic bags, some are in the active research and development of alternatives, and some set up a long-term “plastic ban” goal.
Eco-friendly Bag packaging
PLA Bag
Packaging bags can be divided into biodegradable bags and non-biodegradable bags according to their degree of environmental protection.
Degradation can be divided into “degradable” and “full degradation”.
General biodegradable bags refers to the production process to add a certain amount of additives, such as starch, modified starch or other cellulose, photosensitizers, biodegradable agents, etc., so that their stability decreases, and then easier to degrade in the natural environment of plastic packaging bags.
Fully degradable bags are plastic products that are all degraded into water and carbon dioxide.
The main raw material of this fully degradable material is processed from corn, cassava, etc. into lactic acid, also known as PLA.
PLA material
PLA (polylactic acid) is a new type of degradable material that can be prepared by extracting starch from renewable plants, then making lactic acid through biological fermentation, and finally through chemical synthesis
PLA has excellent degradability and can be completely degraded by microorganisms in the end.
Products made from PLA can be completely degraded to CO2 and water after use, which is also non-toxic and non-irritating, That’s why
It is a widely recognized environmentally friendly material.
PLA has similar mechanical properties to polypropylene, while its gloss, clarity, and processability are similar to polystyrene, and its processing temperature is lower than that of polyolefin.
It can be processed into various packaging materials, fibers, and nonwovens through injection molding, extrusion, blistering, blow molding, spinning, and other general plastic processing methods, and is widely used in industrial, agricultural, medical, and civil fields.
The Pro and Con of PLA material
- Advantages
Biodegradable materials have their advantages in terms of performance, practicality, degradability, and safety.
In terms of performance, biodegradable plastics can reach or exceed the performance of traditional plastics in some specific fields;
In terms of practicality, biodegradable plastics have application performance and health performance similar to similar traditional plastics;
in terms of degradability, biodegradable plastics can complete degradation in the natural environment (specific microorganisms, temperature, humidity) relatively quickly after use and become fragments or non-toxic gases that can be easily used by the environment, reducing the impact on In terms of safety
The substances produced or left by the degradation process of degradable plastics are harmless to the environment and will not affect the survival of human beings and other organisms.
- Disadvantages
The biggest obstacle to replacing traditional plastics is the high production cost compared with similar traditional plastics or recycled plastics.
Therefore, biodegradable plastics have more substitution advantages in application areas such as packaging and agricultural films, which are short-lived, difficult to recycle and separate, and have low-performance requirements and high impurity content requirements.
Paper Bag
A Paper bag is a container made of paper, usually with an opening at the top for inserting objects.
Paper bags are commonly used for shopping, as they are inexpensive and disposable. Paper bags can also be recycled or reused.
Paper bags are made from a variety of paper types, including:
– Kraft paper: A type of paper made from wood pulp. Kraft paper is strong and durable, making it ideal for shopping bags.
– Recycled paper: Paper that has been used before and then recycled. Recycled paper is often used to make shopping bags.
– Laminated paper: Paper that has been coated with a thin layer of plastic. Laminated paper is more resistant to tearing and moisture than uncoated paper.
Paper bags come in a variety of sizes, depending on their intended use. Shopping bags typically range from small (10 x 15 cm) to large (60 x 80 cm). Gift bags and packaging bags can be even larger.
Paper bags can be decorated in a variety of ways, including:
– Printing: Paper bags can be printed with designs, logos, or text.
– Embossing: A design can be embossed onto the paper bag using a special plate.
– Debossing: A design can be debossed into the paper bag using a special plate.
– Foil stamping: A design can be stamped onto the paper bag using foil.
Paper bags can be made from recycled paper and are often recyclable themselves.
However, some types of paper bags, such as laminated paper bags, are not recyclable.
FSC Certification
As global forest problems became more and more serious: forest areas were decreasing, forest degradation was severe, and the area and quality of forest plants were declining,
some purchasers in Europe and the United States actively responded to environmental problems by proving that trees were legally sourced wood products, and finally the FSC Forest Certification was born to monitor the origin of wood products to ensure legality.
FSC（ Forest Certification）’s mission is to promote environmentally friendly, socially beneficial, and economically viable forests worldwide through the development of recognized principles and standards for forest management.
FSC was founded in 1993 and its international center is now located in Bonn, Germany.
Non-woven Bag
Non-woven bags are a type of reusable bag made from polypropylene.
They are recyclable, durable, and lightweight, making them a great alternative to paper or plastic bags.
Non-woven bags can be used for shopping, storing items, or packing lunch. When choosing a nonwoven bag, look for one that is sturdy and has a reinforced bottom.
Avoid bags that have been treated with chemicals or dyes, as these can leach into food or clothing.
Non-woven bags are a great way to reduce your reliance on paper or plastic bags.
They are also an eco-friendly option that can help reduce waste and litter. When using a non-woven bag, be sure to wash it regularly to keep it clean and sanitary.
Avoid using it for raw meat or produce. Non-woven bags can last for years with proper care, making them a smart investment for the environment and your wallet.
We wrote a blog about the benefits of Non-woven bags, if you want to know more about non-woven bags, read this blog: about non-woven bags.
Calico Bag
Calico bags are reusable bags that are made from a natural fiber called calico.
Calico is a type of cotton that is often used for making quilts and other types of fabric crafts.
The bags are usually brightly colored and have a tight weave, which makes them ideal for carrying groceries or other items.
The term “calico bag” can also refer to a type of shopping bag that is made from recycled materials.
These bags are often found in stores that sell eco-friendly or sustainable products. They are also sometimes given away for free at events that promote green living.
Calico bags are a great way to reduce your reliance on disposable plastic bags. They can be used over and over again, which helps to save money and reduce waste.
Read this blog to get more information about Calico bags.
Why choose Primepac
At PrimePac, we bring together design experts and brand innovators to create fresh ideas, customized packages, and fully efficient processes.
We design creative packaging solutions that cater to a diverse global audience with the in-house knowledge and network of experienced professionals to meet the demands of every type of client.
From our dedicated sales team and warehouse staff in the UK to the experts at our production facilities in China, all of our employees are guided by four core values at the heart of our business: integrity, innovation, passion, and engagement.
Conclusion
So, what can you do to help? It might seem like a daunting task, but every small step counts.
If we all make an effort to reduce our reliance on disposable bags, we can start making a real difference in the amount of plastic pollution that ends up in our waterways and oceans.
And if you’re looking for some eco-friendly bag packaging options for your business, don’t hesitate to contact us.
We have a wide range of environmentally friendly packaging solutions that will suit your needs – and help keep our planet healthy and beautiful.
The Top 15 Cosmetic Packaging Suppliers In 2022
Introduction
The cosmetic industry is booming and especially the need for recyclable quality cosmetic packaging has been increasing.
If you are looking to source high-quality packaging supplies for your cosmetics business, look no further than the top 15 Cosmetic Packaging Suppliers listed below.
These companies are at the forefront of the cosmetic packaging industry, and they offer premium products and services that will help your business thrive.
So what are you waiting for? Check out these top 15 suppliers and get started on finding the perfect packaging for your next beauty innovation!
Weltrade Packaging
Weltrade Packaging Solutions is a company that provides innovative, high-quality plastic packaging to cosmetic brands and product manufacturers.
We are committed to delivering the best solution for our customers by going above any expectations they might have with their mission statement being “We’re honest,” which means telling it like you get it done without beating around the bush or sugar-coating anything;
Transparency also plays an important role when dealing directly with how much time/money will be needed before getting started because this allows both parties to know where each other stands from start till finish while having accountability towards one another at all times through regular checkups so there can never again.
tel: +61 7 5597 0102
address: Unit 1/8 Production Avenue, Molendinar Qld, 4214
Click here to contact them
My Skincare Manufacturer
My Skincare Manufacturer Pty Ltd is a company that specializes in manufacturing high-quality skincare packaging for both large brands and start-ups.
They have been operating since 2009, providing services to many famous companies all over the world including Kiehl’s Australia division where they are heavily invested in maintaining strict quality standards while remaining pure natural without any harmful chemicals or preservatives which make their products very effective at helping you take care of your skin correctly no matter what type it may be!
Address: 25 Craftsman Close, Beresfield, NSW, 2322 Australia
(by appointment only)
Email: info@myskincaremanufacturer.com.au
tel : +61 2 4013 6032
Click here to contact them
CCS Packaging
CCS Packaging is a company that provides packaging and print services to industries such as Media, Consumer, and Personal Care for over 30 years.
The business has recently obtained HACCP certification which means they are committed not only to their work but also to customer’s needs by providing top-tier service with excellent quality products at competitive prices on every project undertaken
We’re FSC® certified! And we have also just gained a new qualification -HACCP(food safety management system).
This means you can trust us when it comes down to getting your food graded packages checked or transported safely across borders
Tel : + 61 2 9748 8333
Fax : + 61 2 9748 4966
Click here to contact them
Star Stuff Group
Our expertise in the packaging industry is unparalleled, with over 30 years of experience to back it up.
From pen technology and innovation all way through service delivery for our customers – you can rest assured that no detail goes overlooked when delivering quality products on time!
We focus on service innovation with an emphasis primarily placed on small-medium sized companies from New Zealand or Australia who need help delivering their products across borders in other countries such as South Africa USA UK et
Phone: 1300 885 044 or (07) 3488 8100
Fax: (07) 3821 4874
Email: sales@ssgp.com.au or fill out the contact form
Unit 1 / 14 Natasha Street, Capalaba QLD Australia 4157
Click here to contact them
HCP
HCP’s customer-centric approach to cosmetic packaging design and manufacture has made them a global leader in the industry.
They offer tubes for all types of color cosmetics including nail polish bottles, as well as skincare products such as eyeshadow palette cases or lip gloss displays that meet international safety standards set by regulators across various markets they serve with high-quality product offerings always exceeding expectations
Add: HCP Packaging USA, Inc. 430 Mountain Avenue, Suite 402
New Providence, NJ 07974, USA
Tel : +1 908 643 7720
Email: sales-northamerica@hcpackaging.com
Click here to contact them
Certina Packaging
Whether you’re looking for a premium product box or something that’s more industrial, Certina has the solution to fit your needs.
With our vast array of decoration technologies, we can create exactly what you need! From silk screening printing metalizing lacquering hot stamping etc.,
There is no limit on how unique and special these boxes will be made to last as long as possible while also being eco-friendly too!.
Tel: +33 4 74 73 16 16
Click here to contact them
Faca Packaging
Faca Packaging, a world leader in the design and production of high-end cosmetic packaging for over 50 years.
They use their experience to create exclusive brands with innovative products that are sold worldwide through dealerships or online retailers such as Amazon Prime
Face’s success can be attributed largely due to the company’s continued investments into R&D; they have 300 active patents waiting on patent lawsuits from other companies which means Faca will likely continue seeing growth even when others may struggle because innovation matters most!
With an all-European factory 100% located within clean rooms where standards like ISO 9001:2015 strictly apply, this gives clients peace in knowing what quality standards must meet if there were any concerns about product delivery
Email：: packagingfaca@facasa.com
Address: Ctra. del Mig, 1-13, 08940 Cornellá de Llobregat, Barcelona
Phone: :+34 93 377 98 12
Fax: +34 93 377 32 11
Click here to contact them
Quadpack
Quadpack is a global leader in cosmetic packaging manufacturing with production facilities around the world, including Europe and North America as well as the Asia Pacific.
The company’s founders have over 35 years of combined experience developing innovative products for some of today’s best-known brands like L’Oréal Paris or Estée Lauder cosmetics – which means they know how important it can be to produce safely without compromising quality!
Address: 2840 Commodore Dr.Suite 120, Carrollton, TX 75007
Tel: 1 (877) 239-2831
Click here to contact them
Quadpack
Quadpack is a global leader in cosmetic packaging manufacturing with production facilities around the world, including Europe and North America as well as the Asia Pacific.
The company’s founders have over 35 years of combined experience developing innovative products for some of today’s best-known brands like L’Oréal Paris or Estée Lauder cosmetics – which means they know how important it can be to produce safely without compromising quality!
Address: 2840 Commodore Dr.Suite 120, Carrollton, TX 75007
Tel: 1 (877) 239-2831
Click here to contact them
ICS
International Cosmetic Suppliers Ltd., established in 1991 by founder and CEO Sue Nichols, ICS provides masstige brands with international support through offices located around the world including Asia (Mainland), North America(United States), and Australasia.
The company’s growth over time has seen them expand new development teams as well as add extensive quality assurance staff for each region which helps to ensure high standards are met on every project they undertake while employing marketing professionals who can offer clients unmatched guidance when it comes making decisions about their needs within beauty supply chains.
ICS LTD.Tel: +86(0755)82396393
Adr: Unit 12H Noble Centre,
1006 Fuzhong 3rd Road,
Futian District,
Shenzhen 518038
Click to contact them
EXPO PACK
The beauty of nature can be found in everything we do, from the packaging to how it looks.
EXPO PACK has been designing and making products for over 30 years with an eye on storytelling power while ensuring customer satisfaction through high-quality materials that are easy customization options or environmental friendliness – all supported by beautiful design features like heavy-duty bottles made out of petrochemical plastics (PET).
In addition, our company offers custom-made solutions so you don’t need to worry about your needs going unfulfilled!
No. 3, Ziqiang 1st Rd.Zhongli Dist, Taoyuan City 32063
TAIWAN
Telephone: 886-3-4631598
Fax: 886-3-4631511
Email: info@epopack.com
Click here to contact them
SeaCliff Beauty
SeaCliff Beauty is passionate about packaging for the beauty industry.
They are committed to creating long-lasting relationships with their customers by providing top-notch customer service that meets all of your needs and exceeds expectations every time!
Seacliff offers high-quality, professional-grade products in both custom-designed box retail packages as well as turnkey solutions which means you can get back up on track quickly whether it be marketing or technical support; they got ya covered at any hour day/night 24×7 365 days per year because when working together there’s no challenge too big
Adr：9840 Irvine Center Drive
Irvine, CA 92618
Phone： (949) 955-1239
Email：sales@seacliffbeauty.com
Click here to contact them
APG Packaging
APG Packaging is a veteran-owned business that has been providing high-quality products at affordable prices for over 25 years.
We have factories in both the US and Asia to ensure fast production speeds while maintaining below-market rates cost structures–making us your perfect partner!
Our people are dedicated professionals with extensive experience managing large projects across various industries; they take pride not only in meeting deadlines but also in exceeding them.
When you work together as part of our team – whether it’s packaging an item or creating new processes entirely, you will know what we are able to do
SKS bottle and packaging
The founder of SKS Bottle and Packaging, Inc had the vision to help people live healthier lives by providing them with environmentally friendly products.
With this goal in mind, they created eco-friendly bottles that are both affordable for all budgets as well made from 100% recycled materials which will never end up in your local landfill or incinerator because it’s too small!
Since its inception 35 years ago (1986) SKS has grown into an industry leader not only among packaged goods but also within healthcare facilities where many hospitals order our packaging supplies regularly – including some Fortune 500 companies
Add 10 Skyward Dr.
Saratoga Springs, NY 12866
Phone: 518-880-6980
Fax: 518-880-6990
Click here to contact them
Lumson
Lumson, the company in Capergnanica (Cr) and S. Maria di Sala that produces 120 million plastic bottles per year with an investment over 3 shifts of 250 employees working for them
Lumson is one out of three factories investing in new technology which can produce different kinds of technologies making it very industrial-strength when manufacturing packaging materials such as bottles;
However, Lumsoin’s most important asset isn’t only its equipment but also its workforce who have skilled hands thanks to education programs provided throughout all levels.
Add: HEADQUARTERS & PRODUCTION
Via Tesino 62/64
I-26010 Capergnanica (CR)
Tel. +39 0373 23 31
Fax +39 0373 23 33 55
Click here to contact them
Primepac
At PrimePac, we bring together design experts and brand innovators to create fresh ideas, customized packages, and fully efficient processes.
We design creative packaging solutions that cater to a diverse global audience with the in-house knowledge and network of experienced professionals to meet the demands of every type of client.
From our dedicated sales team and warehouse staff in the UK to the experts at our production facilities
In China, all of our employees are guided by four core values at the heart of our business: integrity, innovation, passion, and engagement.
Address:15/10 Chilvers Rd,
Thornleigh
NSW 2120
Email: info@primepac.com.au
Tel: (02) 9008 1338
(02) 9008 1394
Click here to contact them.
Conclusion
That’s all for today!
We hope you enjoyed this list of top cosmetic packaging suppliers. If you still have any questions, please feel free to contact us!
And don’t forget to keep an eye out for our next blog post, where we will be discussing the latest trends in cosmetic packaging. Thanks for reading!
Top 10 Suppliers for Biodegradable Takeaway Packaging
Introduction
Are you looking for biodegradable takeaway packaging? If so, you’ve come to the right place.
In this blog post, we will discuss some of the best biodegradable takeaway packaging options available on the market today.
We’ll also discuss the benefits of using biodegradable takeaway packaging, and we’ll provide some tips for choosing the right biodegradable takeaway packaging for your business.
So whether you’re looking for a new way to package your food takeaway items or you’re just curious about biodegradable takeaway packaging, be sure to read on!
We believe that the information in this blog can solve most of your problem
The blog will include the following topics ：
What is biodegradable takeaway packaging？
The production of biodegradable takeaway packaging
Benefits of biodegradable takeaway packaging
What is Biodegradable Takeaway Packaging？
Takeaway biodegradable packaging is plastic that is biologically decomposed by the action of microorganisms, such as bacteria and fungi.
In order to biodegrade bioplastics, these microorganisms need oxygen, water, warmth, and nutrient elements from the surrounding soil or environment.
Of course, food-based bioplastics are not biodegradable by themselves.
In other words: if they are thrown into the soil without sufficient oxygen and warmth (such as snow-covered ground), then there is no chance that they will be decomposed by animals or plants.
However, if we bury them right under the surface of soil and include sufficient nutrients in our biodegradable plastics then they will break down faster.
The decomposition of bioplastics is also called biodegradation or bioremediation.
Biodegradable takeaway packaging is a much better alternative to regular plastics made from fossil fuels. Unlike those harmful chemicals, bioplastics are manufactured using renewable raw materials such as plants or even waste products!
Although the production of bioplastics needs some extra energy input compared to “normal” plastic production, European legislation for example has factored in certain climate benefits.
This means that you can use a smaller amount of bioplastic before its carbon footprint becomes equal to that of petroleum-based plastic.
The Production of biodegradable takeaway packaging
Takeaway biodegradable packaging is made by having biodegradable plastics along with other biodegradable products.
Biodegradable plastic is made from bioplastic, which are plastics that have been developed to reduce the impact on the environment.
Most of these bioplastics come from natural sources such as tapioca or corn starch. The second big ingredient in reusable takeaway containers would be polylactic acid (PLA).
PLA is a bioplastic that has been developed for use in disposable food ware, which can usually be found being used in cups and cutlery.
Plastic containers are not the only materials used in making biodegradable takeaway packaging; biodegradable paper is used as well.
This material would consist of cardboard boxes, biodegradable cups, and biodegradable carry bags to hold the food such as burgers and chips.
Benefits of biodegradable takeaway packaging
Easy to degrade
We all know that biodegradable takeaway packaging exists, but do we realize that its benefits amount to more than just being environmentally friendly?
Biodegradable takeaway containers are made from biodegradable materials such as cornstarch and sugarcane.
These materials decompose naturally when exposed to micro-organisms in the environment through processes such as biodegradation and bioconversion.
Biodegradable takeaway boxes are a great alternative to plastic. They biolve quicker and will break down much faster when exposed to an environment with high temperatures, such as composting facilities or landfill sites.
This means they won’t sit in landfills for years as conventional plastics do. If biodegradable takeaway packaging biodegrades faster, this means there are fewer pollutants.
Bioplastic biodegrading releases fewer harmful toxins into the environment.
While biodegradable takeaway containers decompose naturally in landfill sites, bioplastic biodegrades at a much higher speed than traditional plastics.
When confronted with oxygen, sugarcane-based bioplastics break down within 40 days to about water and carbon dioxide gases.
Bioplastics made from cornstarch are even faster – they take only 14 days to decompose naturally!
Less dependency on oil reserves
A large amount of bioplastic is made out of plants which reduces our dependency on oil reserves. This helps us become more sustainable as a nation by reducing our carbon footprint, and making bioplastic biodegradable takeaway containers a more environmentally friendly alternative.
Safe
Bioplastics are made from natural materials that break down in an oxygen-rich environment such as composting facilities and bioconversion sites, while traditional plastics need heat or sunlight to degrade.
Bioplastic biodegrading is a much more environmentally friendly method of disposal than burning.
Burning plastics leads to the release of harmful toxins which negatively affect our air quality and cause damage to ecosystems around us – all negative effects we can avoid by using bioplastic takeaway containers.
Where to buy biodegradable takeaway packaging
Takeaway Packaging
We at Takeaway Packaging love to help our customers create innovative food packaging.
Our bespoke design service will give your brand the final touches it needs for a package that stands out from other products on shelves!
With our expert help, we can create custom designs that are tailored specifically to your needs and taste. We want to ensure you get quality ingredients without paying an overpriced price because of their uniqueness or popularity among consumers who enjoy trying new things.’
Primepac
We’re all about creativity, integrity, and innovation.
PrimePac is a team of designers who want to help you create fresh ideas with customized packages for your brand or company’s needs – no matter where they are located!
Our production facilities in China provide premium quality products that will make any product stand out from the rest because we do things differently than anyone else…
Versupack
In 2008, Versupack started as a distribution company for the Horeca and Industrial sector in the Baltic States.
We provide recyclable plastic packaging materials such as paper cups to environmentally friendly disposable food service containers.
The product we provide is highly focused on sustainability, including compostability or biodegradable production practices
What we do helps businesses reduce their carbon footprint while still delivering great customer service!
Harvest
The company’s name, Harvest originally stems from its founding in 2003.
Located in Foshan City Guandong province China; this enterprise has been dedicated to providing safe efficient and eco-friendly food packaging solutions for customers both domestically as well internationally through distribution channels that span over 10 years of experience.
They are able to provide general or biodegradable plastic packaging along with paperboard folding & molds made out of fiber products which can be tailored according to your need.
Ambican Distribution Ltd.
If you want to do your bit for the environment and would like us, Ambican Distribution Ltd., to help provide high-quality recyclable biodegrade or compostable single-use packages that will suit any business needs then get in touch with our team today.
We have competitive prices as well as supplying to various food service outlets such as cafes delis street vendors contracted catering companies etc.
Whether it’s breakfast cereal lunchboxes disposable shower trays takeaway boxes Nespresso pods spare parts presentation supplies packing material erasers ice cube molds sushi papers serviettes napkins toilet paper twist ties plastic straw.
Vegwares
Vegware’s award-winning products are known for their quality, performance, and design.
They showcase your menu offerings to the world in a way that makes you stand out from other restaurants!
VEGWAVE offers sustainable options like plant-based compostable foodservice packaging which can help cafes meet government regulations or even become more eco-friendly by giving them an opportunity of being showcased on our website where they will appear alongside other businesses committed to sustainability goals.
OSQ
The GDC group’s trademark OSQ provides a range of sustainable packaging solutions that are 100% locally designed and developed, in total compliance with industry regulations.
The innovation at the heart of our business comes from an internal R&D team who creates eco-friendly paperboard resources combined with biodegradable films for windows to surpass Chinese & European analogs while still meeting all global standards – this means you can be confident your product will reach its destination safely!
The food packaging industry is one that has been around for a long time, and it’s about to get even more competitive.
We’re going on an international scale with our new position as leaders in Russia/CIS; now we need to show others how they can do this too by creating eco-friendly products while shaping their mentality towards sustainable practices globally!
Good start packaging
From 2009 to date, Good Start Packaging has been on a mission inspired by the environment and business.
We believe that composting is key for sustainable living and work hard at spreading this knowledge through our company’s services while helping foodservice operators build successful businesses capable of enduring future challenges like increased regulation or economic fluctuations without compromising customer satisfaction
We offer affordable pricing options which include comprehensive recycling programs so clients can have peace of mind knowing their operation practices will remain green no matter what happens around them!
Goodnatured
We make eco-friendly products that are made with earth-friendly materials. We do our best to eliminate chemicals of concern like bisphenols, phthalates, and endocrine disruptors from all parts of the production process so you can be safe while also living sustainably!
Our goal is simple: help people find better alternatives for themselves AND protect Mother Earth at every opportunity possible by offering an assortment ranging in styles & prices appropriate for everyone’s needs–whether they’re looking just want something basic or indulging themselves into high design
Enviropack Ltd
With a focus on quality products, affordable prices, and flexible volumes Enviropack is well placed to serve different demands.
They offer an unrivaled range of environmentally friendly packaging sourced from ethical sources which biodegrade or compost easily when disposed of in landfills.
Their wide variety caters for many applications such as foodservice requirements through to retail distribution needs making them one-stop-shop suppliers with global reach!
Conclusion
Biodegradable takeaway packaging is the future of sustainable food packaging.
Not only is it better for the environment, but it also has a number of benefits that regular plastic takeaway packaging does not have.
If you are looking for an environmentally friendly and sustainable option for your takeout needs, biodegradable takeaway packaging is the way to go.
It’s time to make the switch from traditional plastic packages for your goods! You can find these types of packaging at any number of retailers, so there is no excuse not to do it today.
If you still have any questions, please feel free to contact us! Thanks for your reading
Cosmetic Packaging Material: All You Want To Know
All You Want To Know About Cosmetic Packaging Material
Introduction
If you want to create a line of cosmetic products, there are many tasks you need to perform, such as making a list of ingredients, creating formulations, and then testing the product.
But the most important step is choosing the best packaging for your products.
The reason is that packaging is the first thing that catches the attention of potential customers.
And we know that it is very important to make a good impression on your customers and clients.
In this article, we’re going to talk about some common types of packaging materials you can use.
We believe that most of your problems with customers’ packaging can be solved after reading this blog.
Types of cosmetic packaging
When it comes to packaging, we also think of three different layers: the outer packaging, the inner packaging, and the product packaging.
The outer packaging
The outer packaging is The shipping box or mailer box in which your cosmetic products are packed to be delivered or the bag in which they are packed at the checkout In a shop
For shopping online, the first thing your customers will Access is your outer packaging, such as shipping boxes, mailer boxes, and so on.
The inner packaging
boxes your customers open to get their lipstick or cream jar.
Different cosmetic packaging materials
Glass
Glass is the safest material for cosmetic products.
This material is an ideal choice for products that contain different types of oils and acids.
As glass is not affected by corrosion, it can stand the test of time.
Glass is also easily recyclable.
The advantages of glass
On the good side, glass is generally considered the most “natural” of the lot, both in terms of its production (low pollution) and its composition.
Indeed, the manufacture of one ton of glass requires about 700 kilos of sand, 200 kilos of limestone, and 300 kilos of various raw materials.
which also happen to be found all over the planet!
In addition, it gives the product an elegant, even luxurious touch. For example, thick-walled glass jars are often used for creams, balms, and also eyeshadows, lip glosses, and gels.
Glass bottles and flasks are the norms for essential oils and vegetable oils.
Besides, tinted glass (amber or blue) is preferred so that the contents are protected from light and do not deteriorate.
Being easy to clean, even at high temperatures, glass containers are easily reused.
Glass is also easily recyclable. Throwing a glass jar or bottle into the waste garbage can has become a well-established habit for most consumers.
The disadvantages of glass
On the downside, glass is obviously a heavy and fragile material, so its eco-balance (transport and logistics) is greater than with plastic or metal.
It is also quite energy-consuming since the melting necessary for its manufacture implies reaching about 1500°C, at a rate of more than 1160 kWh /tonne of glass produced.
3. Plastic
It is light, flexible, unbreakable, and hygienic, not to mention its low cost.
From an aesthetic point of view, plastics are also extremely flexible and can therefore adopt a wide variety of shapes and colors.
The plastics industry is also renewing itself to offer more and more recycled plastic containers.
It is also important to understand that not all plastics are created equal.
As such, we recommend these two types: PET (polyethylene terephthalate – number 1), and PP (polypropylene – number 5);
The latter is preferred because of its higher recycling rate.
We should also mention the recent appearance of PET bio-plastics, made from sugar cane.
Their use is still rare, but they should be of interest to many manufacturers in the future…
A PET container shipped 1,000 km away saves 19g of CO2 (carbon dioxide equivalent) compared to the same glass container.
The advantages of plastic
It is obviously its low cost that makes it the market leader.
It is also light, flexible, unbreakable, and hygienic.
From an aesthetic point of view, plastics are also extremely flexible and can therefore be made in a wide variety of shapes and colors.
Since the end of the 2010s,the plastics industry is also renewing itself to offer more recycling options. This good news shows the evolution of our sector, but can this alone solve its problems?
The disadvantages of plastic
In addition to the environmental problems of the oil from which this material is derived, a drawback of plastic is its physical stability.
It is vulnerable to absorption, stress cracking, and cracking. Its poor resistance to ink and other chemicals also limits its use for certain types of packaging.
Some plastics used in the food industry have recently been suspected of releasing toxic substances (bisphenols, phthalates…) under certain conditions of use (e.g. microwave cooking).
These phenomena of interactions between the container and the content can potentially have an impact on the quality, effectiveness, and safety of a cosmetic product.
However, they are not yet sufficiently studied in the cosmetics sector.
Moreover, plastic is not infinitely recyclable. It ends up either rejected in nature in some form or burned in sorting centers.
And there is a problem of energy consumption and potentially toxic emissions into the environment.
PET
Polyethylene terephthalate looks like glass. But in reality, it is clear plastic bottles or jars. In most cases, it is used for beverages and cosmetics.
Over the years, they have gained popularity because they are unbreakable, inexpensive, and lightweight.
PET is one of the best cosmetic containers because it creates a solid barrier between the product and the solution it contains.
Thus, the material does not react with the plastic. PET is a perfect choice if you want to store essential oils and alcohol.
PP
Propylene plastic is also known as PP, which is another popular packaging solution for cosmetic and skincare brands.
When it comes to strength, it’s better than PET. Some examples of these units include deodorant tubes, square lotion tubes, and hand cream jars, to name a few.
HDPE
HDPE, or high-density polyethylene, is a popular material choice for cosmetic packaging due to its durability and resistance to wear and tear.
HDPE is versatile in that it can be molded into a wide range of shapes and sizes, making it ideal for accommodating a variety of products and applications.
Additionally, HDPE is fully recyclable, making it a sustainable material choice for eco-conscious consumers.
Selecting HDPE for your cosmetic packaging needs is important. Make sure to consider the weight and contents of product you plan on packing, as well as how much pressure will be placed onto it during shipping or storage periods in order protect what’s inside.
The Application of Plastics Materials in Cosmetic Packaging
At present, the application of barrier packaging materials in cosmetic packaging is in a period of increasing use.
Commonly used domestic high-barrier materials include aluminum foil, polyvinyl alcohol (PVA), ethylene-vinyl alcohol copolymer (EVOH), nylon (PA), polyethylene terephthalate (PET), etc. Aluminum foil, PVA, and EVOH are high-barrier materials.
Nylon, PVA, and EVOH have similar barrier properties and are medium barrier materials.
For cosmetic tube packaging products, if the product itself has high barrier properties, the following three types of barrier plastic pipes are generally used.
ABL
its typical structure is PE/PE+EAA/AL/PE+EAA/PE, The structure of the aluminum foil is what defines its barrier property. The more holes there are in an individual layer, the lower it will be for conducting electricity and heat away from whatever you’re cooking on top. When the thickness of the aluminum foil increases, the barrier property increases ;
PBL
its typical structure is PE/PE/EVOH/PE/PE, all plastic compounds, and its barrier layer is usually EVOH or oxidized PET. As the thickness of EVOH increases, the barrier is strengthened;
Get more information about ABL and PBL, you can read this blog:
ABL vs. PBL vs. Co-Extruded Tubes: What’s Right For You
3. Aluminum
Metal cosmetic containers are most often made of aluminum, as shown by our hairspray, deodorant, shaving foam, or toothpaste.
As a barrier material, aluminum offers excellent protection against germs, UV, humidity, and temperature variations.
Aluminum bottles are therefore particularly suitable for fragile contents, being able to dissipate heat.
The advantages of aluminum
As a barrier material, aluminum offers excellent protection against germs, UV, humidity, and temperature variations.
By dissipating heat, aluminum bottles are particularly suitable for fragile contents.
Typical example: hydrolats, whose fragrances and virtues can then be preserved.
Another advantage is that metal packaging is unbreakable and infinitely recyclable.
For companies wishing to be environmentally friendly, aluminum is an excellent choice.
It saves natural resources, even though aluminum is the most abundant metal on earth.
Particularly positive is the fact that about half of the aluminum used by industry in Australia is recycled aluminum.
Much lighter than glass, aluminum is a material that can be shaped in any size or shape. It has many exclusive design possibilities because it does not break like glass would, and its silver color adds to the elegance of whatever product you use this for.
The disadvantages of aluminum
The production of aluminum causes air pollution and toxic waste during the extraction and processing of the metal (e.g. red mud).
And from a practical point of view, aluminum dents at the slightest impact.
Finally, aluminum has recently criticized when it was introduced into cosmetic formulas themselves.
It is suspected of being neurotoxic and present in some deodorants and toothpaste.
But aluminum cosmetic containers are not concerned because a food-grade interior varnish always separates the container from the content, thus avoiding any risk of migration.
Glass Or Plastic: Which Pollutes More?
If we take into account only the basic material intensity figures (ratio between the domestic consumption of raw materials and the gross domestic product), a jar made of PET (a thermoplastic polymer) uses twice as much abiotic material (minerals and fossil fuels) and 17 times as much water (needed in its manufacturing process) as a similar jar made of glass.
To obtain 1 kilo of PET plastic, 2 kilos of oil are needed.
Thus, the amount of greenhouse gas emissions is 5 times higher for the plastic jar. In this respect, glass is the clear winner.
But beware: this result is only valid in a local system, where the pollution caused by the transport of the product is negligible.
Over long distances, the material intensity figures are multiplied by the number of kilometers traveled to transport the glass.
In this case, the glass loses out because it requires five times as much transportation due to its weight.
A PET jar shipped 1000 km away saves 19g of CO2 compared to a glass jar.
In addition, plastics recycling is progressing.
PET is often recycled, at least in part, and can be incinerated to produce fuel.
PP (Polypropylene) plastic is even more environmentally friendly: it is just as light and fully recyclable since it can be sorted with recyclable plastics.
Cellulosic materials
We can’t talk about packaging without talking about cellulosic material, that is to say, any packaging made of wood, paper, or cardboard. Boxes, POP displays, cartons, and trays are generally designed with cellulosic materials.
Many industries are turning to these packaging solutions: food, cosmetics, fashion…
Advantages of Cellulosic Materials
Cellulosic materials offer the advantage of being biodegradable, easily recyclable, and reusable. They’re also inexpensive!
Paper or cardboard packaging has the advantage of supporting several printing methods and offers a wide variety of renderings.
Colors, patterns, and finishes stand out very well on this type of support.
The manufacturers dissociate two types of cardboards: flat or compact and corrugated.
The corrugated cardboard is composed of one or more sheets of fluted paper.
It is often used for packages or packaging of fragile or heavy products.
Light and not very cumbersome, cellulose materials have the advantage of being able to be stored flat during transport.
It is, therefore, possible to transport large quantities.
The disadvantage of cellulosic materials
Even if cellulosic materials seem to be a miracle solution to the environmental crisis, this idea must be qualified.
Indeed, it can often be difficult to recycle cellulosic fiber packaging covered with ink or varnish because these finishes can hinder its recyclability.
Just because you use cardboard for your packaging doesn’t mean you have a lower environmental impact!
Besides they are sensitive to humidity and are less resistant or impermeable than glass or steel.
Conclusion
So what is the best type of packaging for cosmetics?
The answer to that question depends on a variety of factors, including Your packaging needs, budget, environmental elements, and so on.
In Primepac, we’ll provide packaging solutions that can fit your products based on your requirements.
Please feel free to contact us and let us help with your packaging.
However, plastic is cheaper to produce and easier to recycle.
Ultimately, it’s up to the cosmetic company to decide what material they want to use based on their specific needs and priorities.
We hope this article has given you a better understanding of the different types of cosmetic packaging materials available today.
Still, have any questions? Please feel free to contact us!
Everything about Biodegradable takeaway packaging in 2022
Introduction
The food service packaging market is expected to grow at a rate of 10% over the next five years.
This growth can be attributed in part due to the company’s demand for quick-service restaurants (QSR), consumers’ preference for on-the-go consumption, and eCommerce apps that send items through various channels.
Such growth makes have a great influence on the environment.
The problem is particularly bad when it comes to takeaway packaging.
People often get our food delivered in plastic or foil containers that can’t be recycled, and these containers often end up in landfills.
In fact, the amount of takeaway packaging that’s wasted each year is enough to increase a few new islands
This is a major problem, not just because of the environmental impact, but also because of the cost.
Wasting takeaway packaging costs the UK economy £7.15 Billion every year.
From the statistics, we can know how heavy the wasting is.
That’s why most governments around the world are appealing to people to use Reusable takeaway packaging.
Some of them even publish relative laws.
In this blog, we will share some information about reusable takeaway packaging, enabling us to make a contribution to environmental protection.
The blog will include the following topic：
The increasing awareness of Friendly packaging
What is Biodegradable Takeaway Packaging？
The benefits of Eco-friendly takeaway packaging
Why choose an environmentally sustainable packaging method?
The material of reusable takeaway packaging
The need for more sophisticated material recovery schemes
Suppliers for reusable takeaway packaging/where to buy sustainable takeaway packaging
The increasing awareness of Eco-Friendly packaging
Plastic restrictions and bans provide space for the development of biodegradable plastics
According to a report released by the Organization for Economic Cooperation and Development (OECD) in 2018, global plastic waste production has continued to increase since 2015, exceeding 300 million tons per year, and is forecast to reach about 12 billion tons by 2050.
According to the National Engineering Research Center for Engineering Plastics of the Chinese Academy of Sciences：
of the hundreds of millions of tons of plastic waste worldwide in 2019, about 35% was recycled, incineration and cracking accounted for about 12%, landfills or landfills accounted for 46%, and the proportion flowing into the ocean was about 7%.
Without containment, there will be one ton of plastic for every three tons of fish in the ocean by 2025;
by 2050, plastic will weigh more than fish.
Global Disposal Methods of Waste Plastics in 2022
Waste plastic pollution is serious, countries not only tighten the use of plastic packaging from the source through plastic restrictions and plastic bans but also look for alternatives from downstream applications.
Developed countries and large multinational enterprises in the world have gradually attached importance to the processing and application of renewable plastics, and several countries promise to recycle and reuse plastic packaging by 2030 at no less than 35%, which provides renewable plastics and degradable plastic materials
This provides space for the development of renewable and degradable plastic materials.
What is Biodegradable Takeaway Packaging？
In concrete terms, Recyclable and eco-friendly packaging（also known as） should have the following meanings.
Packaging reduction
The implementation of packaging reduction should be the least amount of moderate packaging while meeting the functions of protection, convenience, and sales.
Countries like US and UK are struggling to take priority the packaging reduction for the development of harmless packaging
Easy to recycle
Packaging should be easy to reuse or easy to recycle.
Recycling and other measures like incineration or composting waste can be used in new ways for improved soil quality while also reducing greenhouse gas emissions that contribute to climate change.
Not only does it not pollute the environment, but it can also make full use of resources.
Degradable
Packaging waste can be degraded.
In order not to form a permanent waste, non-recyclable packaging waste should be able to decompose and decay, thus achieving the purpose of improving the soil.
Reduce, Reuse, Recycle and Degradable are the 3Rs and 1D principles of the development of green packaging that is now recognized in the world in the 21st century.
Non-toxic
Packaging materials should be non-toxic and harmless to humans and organisms.
Packaging materials should not contain toxic substances or the content of toxic substances should be controlled below the relevant standards.
Harmless to environment
In the entire life cycle of packaging products, they should not produce pollution or cause public harm to the environment.
That is, from the collection of raw materials, material processing, manufacturing products, product use, waste recovery, and recycling until the final disposal of the whole life process, packaging products should not cause harm to the human body and the environment.
In the above meaning of environmentally friendly packaging, the first four points should be the requirement that environmentally friendly packaging has to meet.
Life circulation
The last point is the highest standard for green packaging based on life circulation.
From the above analysis, green packaging can be defined as: One of the greatest benefits to using green packaging is that it can be recycled or reused during its entire life cycle. The materials used in these packages don’t pose any threat for humans and environments.
The benefits of Eco-friendly takeaway packaging
When it comes to takeaway food, the container is just as important as the food itself.
In recent years, there has been a shift towards more sustainable and environmentally friendly takeaway packaging options.
Here are some of the benefits of using reusable food packaging:
Reducing Waste
One of the biggest benefits of using reusable takeaway packaging is that it helps to reduce the amount of waste produced.
Every year, billions of tonnes of waste are sent to landfills, and a lot of this waste is made up of disposable packaging.
By using reusable containers, you can help to reduce the amount of waste that ends up in landfills.
Save Money
Another benefit of using reusable takeaway packaging is that it can save you money.
Buying disposable containers each time you get takeout can add up over time, whereas buying a reusable container once will likely last you many meals.
Environmentally Friendly
One of the main reasons for the shift towards sustainable takeaway packaging is the environmental benefits.
Disposable takeaway packaging is not only wasteful but also creates a lot of pollution.
By using reusable containers, you can help to reduce the amount of pollution that is created.
Compostable
Another option for sustainable takeaway packaging is compostable containers.
Compostable containers are made from materials that can be composted and turned into soil.
This is a great option for those who want to be eco-friendly but also want the convenience of disposable containers.
Durable and Practical
One of the main drawbacks of some reusable containers is that they can be bulky and difficult to carry around.
However, there are many durable and practical reusable takeaway containers on the market that are easy to carry and won’t add extra weight to your bag.
Why choose an environmentally sustainable packaging method?
We believe that there are 5 fundamental reasons.
Not only is it directly evident that a sustainable approach is vital to our future, but it also has the potential to be a huge driver for economic development.
These include natural environmental factors, consumer and economic, and business factors, which provide a strong impetus for sustainable material development.
The planet needs sustainable packaging solutions
With 42% of global plastic used in packaging, most of which is used for single-use only, the problem of plastic pollution from the ecosystem is long-term and ongoing.
The recycling rate for plastics is only 35%. This means that 65% of plastic is burned, landfilled, or simply discarded in the natural environment.
Plastics typically take more than 20 to 400 years to decompose.
The debris or microplastics from decomposing plastics are still present in the atmospheric cycle, in food and soil in water, and in all aspects of our involvement.
Packaging with sustainable materials can break this negative cycle.
A Growing Number of Countries and Regions are Implementing Ordinances to Reduce Plastic Packaging
The UK government announced a landmark announcement on 18.11.2020 in support of a global agreement to tackle plastic pollution.
In addition to the UK, a growing number of countries and cities around the world are taking steps to ban single-use plastics.
In the European Union, the 2019 Single-Use Plastics Directive is designed to combat the 10 most common single-use plastic items on European beaches, which account for 70% of all marine litter in the EU.
In the US, California, Hawaii, and New York have started legislation to ban single-use plastic products such as plastic bags, forks, and food containers.
In Asia, countries such as Indonesia and Thailand are the first to call for measures to ban single-use plastics.
In contrast to waiting for government pressure to legislate, Morgan Stanley Research (MSR) reports that the number of companies implementing the Plastics Strategy in the US has more than doubled year on year between 2018 and 2019.
This suggests that companies are generating relative profits in order to achieve their environmental strategies and social responsibility goals.
Of course, commercial interests that cannot be excluded from the driving force behind the development of sustainable packaging may also be a major factor.
Consumers prefer sustainable packaging materials
According to Ranpak and Harris Research, e-commerce customers in the US, UK, France, and Germany want to work with companies that use sustainable packaging.
In fact, over 70% of consumers in these countries have this preference, with over 80% of consumers in the UK and France preferring sustainable packaging.
Consumers’ preference for sustainable packaging allows them to see paper packaging better than plastic to protect the items they buy.
Paper is the most popular material for packaging food, according to a 2013 study. It was even preferred over velvet!
Food safety
Sustainable packaging is great for protection
There are many articles and sources in packaging and shipping that claim that plastic offers better protection than other types of materials.
These claims clearly do not stand up to sophisticated investigation. This is because sustainable materials have been used as packaging materials for thousands of years before plastic became popular.
Plastic was invented in 1869, but it was not until the advent of the Second World War that it became ubiquitous, a period in which plastic production increased by 300%.
Paper is probably the oldest packaging in the world. Materials such as metal and glass are among the pre-industrial packaging materials together.
Paper is one of the world’s most recognized sustainable materials and can be used for almost every application method for packaging inside boxes, even for cold chain packaging.
In many applications, paper outperforms plastic in terms of protection, sometimes by as much as 58%.
environmentally friendly packaging like aluminum foil can provide good protection to the product
Companies need to improve the sustainability of their business models.
In general, ‘environmental’, ‘social’ and ‘governance’ are collectively referred to as ESG strategies.
The growing ecological awareness of consumers and investors is considered a central part of many companies’ development.
By improving the efficiency of their resources, companies can improve their scores, enhance their brand reputation, improve customer and employee loyalty and gain access to capital and other additional business value.
ESG investments are becoming increasingly popular.
Around a quarter of assets under management in the US alone are ESG-rated investments totaling around US$12 trillion.
The circular economy is expected to generate US$4.5 trillion by 2030.
Companies that improve their ESG performance are prone to attract and retain talent.
With the growing need for environmental protection, the demand for sustainable packaging in the fast-growing e-commerce sector, and the win-win need for companies to benefit economically and achieve sustainability goals, you can be sure that in the near future, more environmentally friendly, recyclable, and sustainable packaging materials will become a major trend in the development of the packaging industry
The material of reusable takeaway packaging
Re-use and recycled packaging materials
The earth and forests are the basis of the ecological balance of human beings, the reckless cutting of wood has brought immeasurable disasters to human society.
In response to this situation, people can consider the use of reusable and renewable packaging materials, for example, use recyclable glass bottles for beer, drinks, soy sauce, vinegar, and other liquid.
Regenerative use of packaging is available in two methods of regeneration
physical methods refer to the direct and thorough purification and crushing, without any residual pollutants, after treatment of plastic and then directly used in recycled packaging containers.
The chemical method refers to the recycled PET (polyester film, which is crushed and washed) have been treated through a chemical process and become a part of the raw material of reusable takeaway packaging Reuse and regeneration of packaging materials, only to extend the service life of plastics, when it reaches its service life, still face the problem of waste disposal and environmental pollution.
Eatable Packaging Film
In the design of part of the food packaging, people have investigated an eatable packaging film that does not affect the original taste of the food packed.
In the 21st century, the world has developed different types of such films, such as a company in the UK that has developed an eatable potato chips packaging, people can eat its packaging after eating potato chips.
Synthetic edible packaging films are transparent, colorless and odorless. They can be used for food packaging that will keep your products safe from corrosion or spoilage due to their tough properties
Degradable materials
Degradable material refers to a plastic whose chemical structure changes in a specific environment that causes performance loss within a specific period of time.
Biodegradable plastics have the same functions and characteristics of traditional plastic, but also break down in sunlight or with microorganisms. These degradable can be divided into smaller pieces that will eventually return to nature when they’re done serving their purpose—just like how we do it here on earth.
For example, a French dairy company extracts substances from sugar beets and mixes them with minerals to make an ecological packaging box.
Paper Materials
The raw material of paper is mainly natural plant fiber, which will decay quickly in nature and will not cause pollution to the environment, and can be recycled to make paper again.
Therefore, many large international companies use recycled paper for annual reports, and promotional products, made of recycled paper letterhead, letterhead to reflect their concern for the environment of the green purpose, but also to establish a good corporate image.
Paper materials also have a variety of uses such as pulp injection molding, composite materials, and construction materials.
In addition to the advantages of being lightweight, low cost, shockproof, etc., pulp molded products also have good permeability, which is conducive to the preservation of fresh goods, in the international circulation of goods, is widely used in eggs, fruits, glass products and other fragile, breakable, afraid of extrusion of the turnover of goods on the packaging.
Stainless steel
One of the main benefits of stainless steel is that it is recyclable.
In fact, over 60% of all stainless steel produced is recycled each year.
This makes it a very eco-friendly material.
Additionally, stainless steel is durable and can be reused multiple times. This means that it can have a long lifespan, which further reduces its environmental impact.
Stainless steel is also a food-safe material, making it ideal for packaging food products.
It is non-toxic and does not leach chemicals into food, like some other packaging materials.
Additionally, stainless steel is sterile and easy to clean, which helps to keep food safe.
There are many other benefits of stainless steel as an eco-friendly packaging material.
It is strong and lightweight, making it easy to transport. It also does not rust or corrode, so it can protect products from damage during transportation.
Stainless steel is also non-reactive, so it can safely be used to package sensitive products.
Overall, stainless steel is an excellent eco-friendly packaging material that has many benefits and applications in the packaging industry.
It is durable, recyclable, food-safe, and non-reactive. It is perfect for packaging a wide variety of products and can help to reduce environmental impact.
Bioplastic
Biodegradable plastic is made from bioplastic, which are plastics that have been developed to reduce the impact on the environment.
Most of these bioplastics come from natural sources such as tapioca or corn starch. The second big ingredient in reusable takeaway containers would be polylactic acid (PLA).
PLA is a bioplastic that has been developed for use in disposable food ware, which can usually be found being used in cups and cutlery.
Plastic containers are not the only materials used in making biodegradable takeaway packaging; biodegradable paper is used as well.
This material would consist of cardboard boxes, biodegradable cups, and biodegradable carry bags to hold the food such as burgers and chips.
bioplastic has a lower melting point and will decompose rapidly when exposed to heat (such as in composting facilities or landfill sites).
This means they won’t sit in landfills for years as conventional plastics do.
If biodegradable takeaway packaging biodegrades faster, this means there are fewer pollutants. Bioplastic biodegrading releases fewer harmful toxins into the environment.
While biodegradable takeaway containers decompose naturally in landfill sites, bioplastic biodegrades at a much higher speed than traditional plastics.
When confronted with oxygen, sugarcane-based bioplastics break down within 40 days to about water and carbon dioxide gases.
Bioplastics made from cornstarch are even faster – they take only 14 days to decompose naturally
Bamboo
Bamboo is a strong and durable material that is also biodegradable.
It is often used for eco-friendly takeaway containers as it is safe for food contact and does not leach chemicals into food as some plastic containers can.
The need for more sophisticated material recovery schemes
Over the past decade, more and more packaging manufacturers have joined the ranks of those practicing the “3Rs of environmental protection” (Reuse, Reduce, Recycle)
The sustainable packaging industry still faces an unavoidable pain point -Most of the recyclable packages are ending up in landfills instead.
Poor recycling systems result in a certain scale of wasted or contaminated resources and increased remanufacturing costs.
Take plastic packaging, for example, only 9 percent of the world’s plastic products are recycled (UN 2018 survey data) and about 90 percent of the world’s waste plastic goes to the ocean (Trucost, a Standard & Poor’s research firm, reports).
When it comes to China, while overall plastic recycling in the country has improved since the introduction of plastic restrictions and waste separation regulations, there is room for improvement in the recycling rate for highly recyclable scrap.
The country uses about 30 million tons of recycled plastic scrap annually, accounting for more than 30% of plastic consumption.
Of these, EPS plastics (foam) have a recycling rate of about 90% (China Plastics Processing Industry Association data)
Plastic waste can be recycled to different degrees depending on its composition.
For example, PET from plastic bottles can be better shredded, melted, and reprocessed for other products, but EPS foam requires more sophisticated processing (Greenpeace study)
Suppliers for reusable takeaway packaging
Primepac
We’re all about creativity, integrity, and innovation.
PrimePac is a team of designers who want to help you create fresh ideas with customized packages for your brand or company’s needs – no matter where they are located!
Our production facilities in China provide premium quality products that will make any product stand out from the rest because we do things differently than anyone else…
Versupack
In 2008, Versupack started as a distribution company for the Horeca and Industrial sector in the Baltic States.
We provide recyclable plastic packaging materials such as paper cups to environmentally friendly disposable food service containers.
The product we provide is highly focused on sustainability, including compostability or biodegradable production practices
What we do helps businesses reduce their carbon footprint while still delivering great customer service!
Harvest
The company’s name, Harvest originally stems from its founding in 2003.
Located in Foshan City Guandong province China; this enterprise has been dedicated to providing safe efficient and eco-friendly food packaging solutions for customers both domestically as well internationally through distribution channels that span over 10 years of experience.
They are able to provide general or biodegradable plastic packaging along with paperboard folding & molds made out of fiber products which can be tailored according to your need.
Ambican Distribution Ltd.
If you want to do your bit for the environment and would like us, Ambien Distribution Ltd., to help provide high-quality recyclable biodegrade or compostable single-use packages that will suit any business needs then get in touch with our team today.
We have competitive prices as well as supplying to various food service outlets such as cafes delis street vendors contracted catering companies etc.
Whether it’s breakfast cereal lunchboxes disposable shower trays takeaway boxes Nespresso pods spare parts presentation supplies packing material erasers ice cubes molds sushi papers serviettes napkins toilet paper twist ties plastic straws.
Vegwares
Vegware’s award-winning products are known for their quality, performance, and design.
They showcase your menu offerings to the world in a way that makes you stand out from other restaurants!
VEGWAVE offers sustainable options like plant-based compostable foodservice packaging which can help cafes meet government regulations or even become more eco-friendly by giving them an opportunity of being showcased on our website where they will appear alongside other businesses committed to sustainability goals.
OSQ
The GDC group’s trademark OSQ provides a range of sustainable packaging solutions that are 100% locally designed and developed, in total compliance with industry regulations.
The innovation at the heart of our business comes from an internal R&D team that creates eco-friendly paperboard resources combined with biodegradable films for windows to surpass Chinese & European analogs while still meeting all global standards – this means you can be confident your product will reach its destination safely!
The food packaging industry is one that has been around for a long time, and it’s about to get even more competitive.
We’re going on an international scale with our new position as leaders in Russia/CIS; now we need to show others how they can do this too by creating eco-friendly products while shaping their mentality toward sustainable practices globally!
Good start packaging
From 2009 to date, Good Start Packaging has been on a mission inspired by the environment and business.
We believe that composting is key for sustainable living and work hard at spreading this knowledge through our company’s services while helping foodservice operators build successful businesses capable of enduring future challenges like increased regulation or economic fluctuations without compromising customer satisfaction
We offer affordable pricing options which include comprehensive recycling programs so clients can have peace of mind knowing their operation practices will remain green no matter what happens around them!
Goodnatured
We make eco-friendly products that are made with earth-friendly materials. We do our best to eliminate chemicals of concern like bisphenols, phthalates, and endocrine disruptors from all parts of the production process so you can be safe while also living sustainably!
Our goal is simple: help people find better alternatives for themselves AND protect Mother Earth at every opportunity possible by offering an assortment ranging in styles & prices appropriate for everyone’s needs–whether they’re looking just want something basic or indulging themselves in high design
Enviropack Ltd
With a focus on quality products, affordable prices, and flexible volumes Enviropack is well placed to serve different demands.
They offer an unrivaled range of environmentally friendly packaging sourced from ethical sources which biodegrade or compost easily when disposed of in landfills.
Their wide variety caters to many applications such as food service requirements through to retail distribution needs making them one-stop-shop suppliers with global reach!
Earthpack is a recycled packaging company that supplies eco-friendly bags and boxes to fashion retailers across America.
The innovative Earth packs work with each client individually, custom designing cutting-edge repurposed products for their business needs while providing complete distribution services along with quality materials all at affordable rates so any size company can afford it!
Tiny Box Company
Tiny Box Company is dedicated to providing customers with eco-friendly options for their branding needs.
We offer recycled jewelry boxes, gift packaging, and rigid boxes made from sustainable materials that are PHF (params health Fully) certified so you can be sure they won’t harm your product or expose anyone who might touch them during shipping!
If we don’t have what exactly it is that YOU need here at our store then get in touch cuz honestly? That’s why this company was established – To Help Your Brand Stand Out
Swap box
The idea of Swap boxes is simple – instead of using disposable packages for your deliveries, you can just use a box that will last up to 500 times.
You don’t have to worry about wasting packaging or filling trash bins anymore! With each person creating 250kgs worth per year in waste alone (and this does not include what we put out when eating takeout), it becomes essential as humans beings to strive towards sustainability by reducing our consumption rate
Barepack
In 2020, a Swedish start-up called bareback launched with the goal to reduce and eliminate single-use packaging in food service.
It was founded to bemoaned sustainability challenges within this sector; since then they have grown from 30 partner restaurants across Stockholm city limits (in Sweden)to 500+ nationwide!
As the market leader for eco-friendly solutions regarding restaurant delivery/takeaway bags -its mission has been accomplished
EcoEnclose
To create sustainable e-commerce packaging solutions that are as innovative and efficient as they can be, we stand behind every product with rigorous sustainability standards.
Our primary goal is to develop new materials for the future of recyclable or recycled products so you’re always shipping green-our packs that aren’t just made from current innovations but forward-looking ones too!
Paper Mart
To create sustainable e-commerce packaging solutions that are as innovative and efficient as they can be, we stand behind every product with rigorous sustainability standards.
Our primary goal is to develop new materials for the future of recyclable or recycled products so you’re always shipping green-our packs that aren’t just made from current innovations but forward-looking ones too!
PakFactory
PakFactory’s mission is to digitize the global packaging industry and make it more accessible for everyone.
They provide a Single Platform that connects customers with partners, serving as both an auction site where anyone can buy or sell any type of product in bulk quantities at competitive prices while also being able to manage all aspects including delivery logistics from one location – creating a seamless experience across every aspect!
Caulibox
Caulibox is not one to get creative with our food, but after a long day at work, we wanted something that would make us feel like ourselves again.
So when you eat your favorite takeout dish and find yourself surrounded by piles of packaging waste from all those tasty treats too far away for one person alone?
It can be kind of overwhelming! And yet…There must always remain some hope in this world because there are ways out — especially if they involve sustainability initiatives such as CauliBox
Conclusion
It is evident that the benefits of eco-friendly takeaway packaging are vast and varied.
Not only does this type of packaging help preserve the environment, but it can also improve business efficiency and save money in the long run.
If you are looking for a more sustainable way to package your takeaways, be sure to explore our range of reusable takeaway packaging solutions.
We offer a variety of materials and styles to suit your needs, so you can rest assured that your food will be transported safely and securely.
For more information on our products or how to get started with sustainable takeaway packaging, please don’t hesitate to contact us today.
English